JVC EXAD KW-AVX800 Bedienungsanleitung Seite 66

Bluetooth
* 21
Menu items
Dial Menu * 22
23
Message*
Open
Search
Special Device
Connect
Disconnect
Delete Pair
* 21
Selectable only for "Bluetooth PHONE" or "Bluetooth AUDIO." Select a device (or "New Device") before operating the
menu.
* 22
Only for the device connected for "Bluetooth PHONE."
* 23
Selectable only when the source is "Bluetooth PHONE" and the device is compatible with SMS (Short Message
Service).
When operating the Bluetooth device, refer also to the instructions supplied with the device.
Selectable settings, [reference page]
Select the method to make a call. [40]
You can read a message from the following message histories.
Unread: Messages you have not read.
Read: Messages you have read.
Unsent: Messages you have not sent.
Sent: Messages you have sent.
• The number of messages in each history is also shown on the monitor.
[37]
[38]
Only for "New Device."
Shows the list of Bluetooth devices which require some special procedure to
establish Bluetooth connection. Select a device you want to connect.
• After selecting the device, use <Open> or <Search> ( above) for
connection.
• Once the connection is established, it is registered in the unit. You can
connect the unit and the device by using <Connect> ( below) from
the next time.
Only for the registered devices.
After selecting a device from among the registered devices ( page 37, 38),
establish the connection with it.
Only for the device being connected.
Disconnect the current device before connecting another device.
Only for the registered devices.
Delete the registered devices.
66