Activating/deactivating TA/PTY
Standby Reception
TA Standby Reception
Press
on the monitor panel to
activate.
The unit will temporarily switch
to Traffic Announcement (TA), if
available, from any source other than
AM.
The volume changes to the preset
TA volume level if the current level is
lower than the preset level ( page
62).
Not yet activated. Tune in to another
station providing the RDS signals.
Press
to deactivate.
PTY Standby Reception
To activate, display <AV Menu>, then
select <Mode>, press [On] for <PTy
Standby> ( next column).
The unit will temporarily switch to
your favorite PTY programme from any
source other than AM.
Not yet activated. Tune in to another
station providing the RDS signals.
To deactivate, press [Off] for <PTy
Standby> in step 3 ( next
column).
• When a DAB tuner is connected, TA Standby/PTY
Standby Reception also works for the DAB tuner and
searches for the services.
To activate PTY Standby Reception
1
Press [AV MENU].
2
Press [Mode].
Indicator
3
TP
Lights up
PTY Standby Reception is now activated for PTY
code <News>: the initial setting.
Flashes
• PTY Standby Reception can be easily activated
Goes off
or deactivated by pressing [SHORT CUT] on the
touch panel, then...
Indicator
PTY
Lights up
Flashes
Goes off
14
page 55
page 12