JVC EXAD KW-AVX800 Bedienungsanleitung Seite 71

• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show
WAV/WMA/AAC Tag.
• This unit can play back files recorded in VBR (variable
bit rate).
• Files recorded in VBR have a discrepancy in elapsed
time indication.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional,
and voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA/AAC files copy-protected with DRM.
– AAC files encoded by using any other application
than iTunes.
– AAC files purchased from the iTunes Store.
– Files which have the data such as AIFF, ATRAC3,
etc.
Enjoying surround sounds
• If <Surround> is set to <On>, "MULTI" surround
playback automatically starts for multi-channel
encoded discs.
• You cannot activate surround for MPEG multi-channel
DVD Video, DivX 2-channel and MPEG 2-channel
sources. If <Surround> is set to <On>, stereo
sounds are emitted only through the front speakers.
"FRONT 2CH" appears on the source information
screen.
• When "FIX" appears on the source information
screen, no sound comes out of the subwoofer.
• When If <Surround> is set to <Auto>,
downsampling is performed for DVD Video (LPCM
only), DVD-VR (LPCM only), and DVD Audio with
fs=88.2 kHz/96 kHz and higher.
SD
• If "No SD Card" appears after removing an SD card,
reattach an SD card or select another playback source.
• When the SD card has no playable files, or has not
been formatted correctly, "Cannot play this SD card
Check the SD card" appears on the monitor. Replace
the SD card. Do not pull out or attach the SD card
while "Now Reading..." is shown on the monitor.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
USB
• If "No USB Device" appears after removing a device,
reattach a device or select another playback source.
• When the USB device has no playable files, or has not
been formatted correctly, "Cannot play this device
Check the device" appears on the monitor.
• The unit cannot recognize a USB device whose rating
is other than 5 V and does not exceed 500 mA.
• While playing from a USB device, the playback order
may differ from other players.
• This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• When connecting a USB device, refer also to its
instructions.
• Connect only one USB device to the unit at a time. Do
not use a USB hub.
• This unit may not recognize a USB device connected
through a USB card reader.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of the devices.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
71
Continued on the next page
REFERENCES