JVC EXAD KW-AVX800 Bedienungsanleitung Seite 63

Menu items
13
External Input*
Beep
Telephone Muting*
Power LED Flash
TouchPanel Sens.
Initialize
* 13
Not selectable when the component connected to the CD changer jack is selected as the source.
* 14
The name of the component detected through the CD changer jack is shown.
* 15
The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
Disc Surround
Menu items
Surround
Surround Mode
Panorama
17
Center Width*
* 16
Selectable only for "DISC", "SD," and "USB."
* 17
This setting takes effect only when the center speaker is activated.
Selectable settings, [reference page]
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod/D. player*
[44, 50]
External: Any other than the above. [54]
• For connecting the Bluetooth adapter and DAB tuner, this setting is
not required. It is automatically detected.
Off: Cancels.
On: Activates the key-touch tone.
15
Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the cellular phone.
Off: Cancels.
On: When the ignition is turned off, the lamp on the
flashes.
Change the sensitivity of the touch panel. As the number decreases,
sensitivity become higher. 1/2/3; Initial 2
Initialize all settings you have made in <AV Menu>. Press and hold
[Enter] to initialize the settings, then reset the unit ( page 3).
* 16
Selectable settings, [reference page]
On, Off, [27]
Auto, Through, Dolby PLII Movie, Dolby PLII Music, [27]
On, Off, [27]
00 to 07; Initial 04, [28]
14
: CD changer, iPod, or D. player
63
button
Continued on the next page
SETTINGS