JVC EXAD KW-AVX800 Bedienungsanleitung Seite 76

Symptoms
• "No Signal" appears.
• The buttons on the monitor panel do not
work.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc can be neither recognized nor played .
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Playback does not start.
• The playback picture is not clear and legible.
• Sound and pictures are sometimes
interrupted or distorted.
• No playback picture appears on the monitor. Parking brake lead is not connected properly.
• No picture appears on the external monitor.
• "Eject Error" or "Loading Error" appears on
the monitor.
• "Region code error" appears on the monitor
when you insert a DVD Video.
Remedies/Causes
• Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
When the monitor panel is open, only VOL +/– and
OPEN/TILT (CLOSE) button work. The other buttons do not
function.
Reset the unit. ( page 3)
Store stations manually. ( page 11)
Connect the aerial firmly.
Eject the disc forcibly. ( page 3)
Unlock the disc. ( page 22)
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording.
• Insert the disc correctly again.
• The format of files is not supported by the unit.
Adjust items in <Picture Adjust>. ( page 58)
• Stop playback while driving on rough roads.
• Change the disc.
( Installation/Connection Manual)
• Connect the video cord correctly.
• Select the correct input on the external monitor.
Changing the source by pressing SOURCE will solve this
error.
Region code is not correct. ( page 4)
76