Product View - Conrad 75 19 90 Bedienungsanleitung

6. Product view

1) Aerial
2) Acoustic signalling device
3) Zone status LEDs
These LEDs visually show the status of the sensors that were programmed for
the respective zone. Additionally, these LEDs show the programming state
during programming.
4) Keypad
Used for arming, disarming and programming.
5) "ARMED" status LED
Is lit when the alarm system is armed.
6) "POWER" status LED
Lights up when the power supply is properly connected.
7) Battery compartment
8) Connections for the voltage supply 12V/DC.
9) "MUTE" button
Is used for deactivating the temporary alarm beep.
10) "LEARN" button
This can be used to programme the sensors or delete them.
11. Alarm mode selector
With this slider, you can set the acoustic alarm.
For this, also observe chapter "9. Signalling function".
30