Features - Renkforce DL-LED163 Bedienungsanleitung

• Make sure the device is sufficiently ventilated when in operation. Never cover the casing.
• Do not place any open sources of fire, such as burning candles, on or directly next to the de-
vice.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants, on the pro-
duct or in its vicinity. Liquids may get into the housing and impair electrical safety. This also po-
ses great danger of fire or potentially fatal electric shock! If this is the case, first power down
the respective mains socket (e.g. via the associated FI switch and circuit breaker) and then
pull the mains cable from the socket. Disconnect all cables from the device. Do not operate the
product anymore afterwards, but take it to a specialist workshop.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Only operate the device in moderate climates, never in tropical climates.
• Do not leave any packaging material unattended. It may become a dangerous toy for children.
• Also observe the additional safety information in the individual chapters of these operating
instructions.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insu-
rance Association for Electrical Systems and Operating Materials are to be observed.
• If you are not sure of the correct connection or if there are any questions that are not covered
by the operating instructions, do not hesitate to contact our technical support or another spe-
cialist.

5. Features

• 48 LEDs (12x red, 12x green, 12x blue, 12x white)
• Stand-alone operation, master-slave operation and DMX operation
• 10 Standalone sound-to-light programmes
• 10 standalone automatic programmes
• 6-channel DMX operation
• Integrated microphone for sound-to-light control
22