Attaching The Exhaust Hood - hanseatic SY-103E6-E33-C55-L52-600 Gebrauchsanleitung

Attaching the exhaust hood

(5)
Pins
1. Place the two halves of the check valve
(5) into the opening on the top of the ex-
haust hood (1). Make sure that the pins
on the valve are facing outwards.
2. Screw the two round-head screws (11)
for hanging the exhaust hood into the
dowels. There must be enough space
between the wall and the heads of the
screws so that the exhaust hood can be
hung by the keyhole openings.
(13)
3. Flip the cover (13) up.
4. Open the locks (14) on the grease fil-
ters (15) and carefully pull the grease
filters (15) downwards to remove them.
(5)
(14)
(15)
Assembly
(11)
5. Carefully hang the exhaust hood on the
two round-head screws (11) using the
keyhole openings.
6. If necessary, remove the exhaust hood
again to loosen or tighten the screws
in order to ensure that the hood is flush
with the wall.
2x
7. Turn two round-head screws (12) into
the prepared dowels to secure the ex-
haust hood, and screw the exhaust hood
tightly to the wall.
(13)
(15)
Page GB-13
(12)
(14)