Changing The Fan Setting; Switching Off The Fan; Lighting; Activated Charcoal Filter - hanseatic SY-103E6-E33-C55-L52-600 Gebrauchsanleitung

Changing the fan setting

• To change the fan setting, touch the sen-
sor for the (other) desired setting. An au-
dible signal will sound; the colour on the
display will change to blue.

Switching off the fan

• To switch the fan off, touch
– the sensor (16)
or
– the sensor for the current fan setting
once more.

Lighting

WARNING
Risk of injury!
If one of the LEDs ceases to work, it
■
must be changed by an authorised
service technician. Note for the ser-
vice technician:This exhaust hood
requires LEDs with the ILCOS D-Code
DSR-0.5-S-64 DC12 V, 0.5 W.
Your exhaust hood is equipped with two LED
lights. The lighting can be switched on or off
independently of the fans.
• To switch the lighting on or off, touch the
sensor (18) .
Operation

Activated charcoal filter

• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it
may be a good idea to insert activated
charcoal filters for exhaust air operation,
too.
• For the source of supply, please see
chapter "Our customer service" on page
GB-22.
• To insert, see "Inserting/replacing activat-
ed charcoal filters" on page GB-19.

Tips on saving energy

– Only switch on the fan when needed; oth-
erwise, energy will be wasted.
– Let the fan run as long as cooking fumes or
steam are present.
– The fan is not needed when cooking only
briefly or warming up foods that have little
or no odour.
– Ensure that there is enough supply air; oth-
erwise, the exhaust hood may not function
optimally. If necessary, open the window or
kitchen door.
– Clean the grease filters (15) regularly.
Page GB-17