Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Dremel 2000 VERSATIP Übersetzung Der Originalbedienungsanleitung

Vorschau ausblenden Andere Handbücher für 2000 VERSATIP:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
ORIGINAL INSTRUCTIONS
GB
Before using the Dremel Versatip, make sure you completely 
read and understand this manual.
WARNING
!
listed below may result in electric shock, fire and/or serious injury.
1. WORK AREA
a.  Keep work area clean and well lit. Cluttered and dark areas 
invite accidents.
b.  Do not keep or bring combustible materials near the tool.
c.  Keep children and bystanders away while operating the tool. 
Distractions can cause you to lose control.
d.  Only use outside or in well-ventilated rooms.
2. PERSONAL SAFETY
a.     S tay alert, watch what you are doing and use common 
sense when operating the tool. Do not use the tool while 
you are tired or under the influence of drugs, alcohol or 
medication. A moment of inattention while operating tools
may result in serious personal injury.
b.     U se safety equipment. Always wear eye protection. Safety
equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c.    D o not overreach. Keep proper footing and balance at all
times. This enables better control of the tool in unexpected
situations.
d.    D ress properly. There is a danger of burning yourself with the
flame or with liquid soldering tin. Wear protective clothing to
protect yourself against burns. Keep your hair, clothing and
gloves away from flame. Loose clothes or long hair can catch
fire.
e.     S ecure the workpiece. Use a clamping device to hold the
workpiece. This allows you to use both hands to operate the
tool.
f.  Keep this manual for future reference.
g.  Do not use the appliance when it is leaking, shows any sign 
of damage or is malfunctioning.
h.    I f the appliance is leaking (gas smell) immediately take it 
outside and check the tightness without a flame, please 
always use soap sud. Filling or refilling the gas cylinder 
must be done in a well ventilated place far away from any 
possible sources of ignition, open flames, pilot lights, electrical 
cookware and away from other persons. Be sure to observe 
the safety instructions and warning notices on the refill 
cylinder do not make any modifications to the appliance. 
i.  Do not work materials containing asbestos (asbestos is 
considered carcinogenic).
j.    T ake protective measures when during work dust can
develop that is harmful to one's health, combustible or
explosive (some dusts are considered carcinogenic); wear 
a dust mask and work with dust/ chip extraction when 
connectable.
READ ALL INSTRUCTIONS.
Failure to follow all instructions
3. TOOL USE AND CARE
a.     S tore your tool in an appropriate place with an ambient 
temperature between 10°C and 50°C. Allow your tool to cool 
off completely before storing. Unused tools should be stored 
away from children in a dry location. Switch off all unused 
tools.
b. 
WARNING
!
or installing / replacing the nozzle.
c. 
WARNING
!
d. 
WARNING
!
e. 
WARNING
!
f. 
WARNING
!
g. 
WARNING
!
INTENDED USE
The Dremel Versatip is intended for a variety of applications you 
will find in the chapter "USE".
ENVIRONMENT
DISPOSAL
The unit, accessories and packaging should be sorted for 
environment-friendly recycling.

SPECIFICATIONS

Description 
Dremel Versatip
Model number 
2000
Power source 
Refined butane gas
Tank capacity 
± 17 ml. / ± 9 grams
Run time 
± 45 minutes (highest setting)
± 90 minutes (lowest setting)
Heat-up time 
Instantly (open flame)
± 25 seconds (tips)
Nominal heat input 
12 g/h
(consumption)
Cool-down time 
Flame guard: 15 min. (< 25°C)
Tips: 17 min. (< 25°C)
Temperature 
1200°C (open flame)
680°C (hot air)
550°C (tips)
Weight 
135 grams (empty tool)
Please familiarize yourself with the components of the Dremel 
Versatip (figure 1), the different tips (figure 6) and the kit content 
(figure 7) before use.
6
Always allow the tool to cool fully 
before removing / replacing tips and / 
Extremely flammable gas under 
pressure.
Do not use near spark or open flame.
Do not puncture or incinerate container 
or store at temperature above 50ºC.
Keep out of reach of children.
Do not try to disassemble this unit.
USE

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Versatip 2000

Inhaltsverzeichnis