C) Switch On The Transmitter And Vehicle; D) Steering Of Vehicle - Reely 1590615 Bedienungsanleitung

c) Switch on the transmitter and vehicle

• Now release the lever (E) so that it sits in the neutral position. Release the steering wheel (C) as well.
First switch on the transmitter using the on/off switch (A) ("ON" = on). The LED (B) on the transmitter flashes.
• First turn the vehicle on using the on/off switch (H) on the underside ("ON" = switched on).
• The transmitter now recognizes the vehicle, the LED (B) turns off.
Always proceed in this order - switch on the transmitter first, then the vehicle. Make sure that while switch-
ing on the vehicle, you do move the lever (E) and the wheel (C) and they stay in the starting position
(neutral position).

d) Steering of vehicle

• Place the ready-to-drive vehicle on the ground. However, if you do not reach into the drive, do not hold the vehicle
by the wheels.
• Using the lever (E), you can drive the vehicle forwards and in reverse driving and stop it.
When the driving forwards or in reverse, the LED on the transmitter lights up (B).
Going forward
• The steering wheel (C) is used to turn the vehicle to the left or right during driving. Do not overturn the steering
wheel; do not use excessive force.
The LED (B) on the transmitter lights up during turning (if the wheel is not in the neutral position).
Turn left
28
Stop
Turn right
Going backwards