Installation Of The Power Supply Unit - Bellcome 2 smart Benutzerhandbuch

è
è
è
è

4.3 Installation of the Power supply unit

DIN rail mounting
1
2
DIN rail
4.4 Installation of the video Terminal
Before starting...
The terminal will be placed at 155cm
height (recommended height).
IMPORTANT! Before connecting the power supply unit's supply fuses, check the
precision of the connections in the system. Check both visually, and by
measurement with an ohmmeter.
IMPORTANT! Install the protection lids of the power supply unit's connections
before connecting the 2 supply fuses (230V/50Hz).
DO NOT TOUCH the wires exiting from the connectors and the terminals of the
power supply unit. Disconnect the fuses (10 A) from the supply's phase and null of
the power supply unit.
ATTENTION! Do not supply components of the installation separately (outdoor
panel, terminals etc.) at tensions higher than 15Vd.c. or directly from the network
(230V/50Hz). DANGER OF ELECTRIC SHOCK and of the door phone system's
destruction.
POWER SUPPLY - 2 smart
(PS2.VDN.ENW)
INPUT: ~230V ± 10% / 50 Hz / 0,4 A
OUTPUT: 28V ± 10% / 1,2 A RISK OF
ELECTRICAL SHOCK!
3
Retainer
Options
for cable passage
≈20 cm
Cable lenght
(from the wall)
A3,5 x 32 screw (2 pcs.)
Surface mounting
Screw
A3,5 × 35(32)
(4 pcs.)
Door phone cable
Wall mounting
POWER SUPPLY - 2 smart
(PS2.VDN.ENW)
INPUT: ~230V ± 10% / 50 Hz / 0,4 A
OUTPUT: 28V ± 10% / 1,2 A
RISK OF
ELECTRICAL SHOCK!
Protection lid (2 pcs.) B2,9 x 13 screw (4 pcs.)
1
2
06/16