Bellcome 2 smart Benutzerhandbuch Seite 31

S1. How to enter the MAIN MENU Page
1. Touch the MENU key
will be showed.
(The Date/Time page will turn off in 3 minutes if there is no
operation.)
2. Touch the MENU key again
shown.
3. The icon is not functional.
4. To exit the MAIN MENU page select the icon
MENU key to confirm.
S2. Ring tone and monitoring settings
Using the keys, select the
Outdoor tone: sets the ring tone calling from the outdoor station.
There are 12 types of ring tones that can be selected. Use the
keys to select the previous / next ring tone, it will ring immediately.
All the ring tones ring twice. To hear the selected ring tone again
touch the MENU key.
Monitor Time: sets the monitoring time duration. Touch the
to select it.
The items Intercom Tone and Auto Record are not functional.
Ÿ
S3. Date and time settings


1. Select the icon on the MAIN MENU page to enter SETUP
setup
PAGE, then use keys to select the Advanced set ... item.
A password will be asked before entering the next submenu. The
default password is 2008. Use the
value; use the keys to select last/ next digit. Touch the MENU
key to confirm and enter the sub-menu page.
2. Select the Date and time set... item. Input date and time: use the
keys to increase/ decrease the value; use the
select last/ next digits. After finishing touch the MENU key
confirm and save the changes made.
The item Other Settings... is not functional.
Ÿ
S4. Slave address (Optional)


Select Advanced set...
setup
1. The Slave Addr Set item sets the master and slave user code. This
parameter is used when a second terminal is added to the
installation (in parallel). For the main Terminal this parameter should
be 0.For the additional Terminal this parameter should be 1.
2. The Guard Unit Set should be set to 0.
in stand-by mode, the Date/Time page
. The MAIN MENU page will be


icon on the MAIN MENU page.
setup
to increase/ decrease the
and touch the
keys
keys to
to
Time
Date
Outdoor Tone -- 01
Intercom Tone -- 05
Monitor Time -- 1min
Advanced Set...
Auto Record -- OFF
Exit
Password:
0
* * *
Slave Addr Set -- 0
Guard Unit Set -- 0
Date/Time Set...
Other Settings...
Information...
Exit
:
1 0 3 2
2 0 1 0 0 3 3 1
Slave Addr Set -- 0
Guard Unit Set -- 0
Date/Time Set...
Other Settings...
Information...
Exit
EN
13/16