Installing Windows - ASROCK 970 Pro3 R2.0 Bedienungsanleitung

2.8 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.9 Installing Windows

TM
Vista 64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
/ XP 64-bit on your SATA3 HDDs with RAID functions, please refer to the document
at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.10 Installing Windows
TM
Vista 64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows
/ XP 64-bit OS on your SATA3 HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.10.1 Installing Windows
Functions
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the "SATA Mode" option to [IDE].
STEP 2: Install Windows
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock 970 Pro3 R2.0 Motherboard
TM
/
TM TM
/ Vista 64-bit / XP
TM
/
TM TM
/ Vista 64-bit / XP
Storage Configuration.
29