Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Copyright©2005 ASRock INC. All rights reserved.
ASRock 939Dual-SATA2 Motherboard
Published June 2005
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK 939Dual-SATA2

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 PCI EXPRESS Slot (PCIE1) Primary IDE Connector (IDE1, Blue) Future CPU Port (FUTURE_CPU_PORT1) Secondary IDE Connector (IDE2, Black) Internal Audio Connector: CD1 (Black) System Panel Header (PANEL1) J1-J8 Jumpers Chassis Speaker Header (SPEAKER 1) 2 2 2 2 2 ASRock 939Dual-SATA2 Motherboard...
  • Seite 3 TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker (No. 7) (No. 4) (No. 5) (No. 3) 3 3 3 3 3 ASRock 939Dual-SATA2 Motherboard...
  • Seite 4: Package Contents

    In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com...
  • Seite 5: Specifications

    Speed: 802.3u (10/100 Ethernet), Supports Wake-On-LAN Hardware Monitor: CPU Temperature Sensing Motherboard Temperature Sensing CPU Overheat Shutdown to Protect CPU Life (ASRock U-COP)(see CAUTION 3) CPU Fan Tachometer Chassis Fan Tachometer Voltage Monitoring: +12V, +5V, +3.3V, Vcore Future CPU Port:...
  • Seite 6 Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. 6 6 6 6 6 ASRock 939Dual-SATA2 Motherboard...
  • Seite 7: Cpu Installation

    CPU. The lever clicks on the side tab to indicate that it is locked. Step 5. Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. 7 7 7 7 7 ASRock 939Dual-SATA2 Motherboard...
  • Seite 8 2.2 Installation of Memory Modules (DIMM) 2.2 Installation of Memory Modules (DIMM) 939Dual-SATA2 motherboard provides four 184-pin DDR (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of the same color.
  • Seite 9: Installing A Dimm

    Future CPU Port allows you to upgrade your AMD 939-Pin CPU to AMD 940-Pin CPU by installing an add-on ASRock M2CPU Board into this future CPU Port on 939Dual- SATA2 motherboard. Before you upgrade the 939-Pin CPU to the 940-Pin (M2) CPU, it is necessary to adjust the jumper settings for those required jumpers on 939Dual- SATA2 motherboard.
  • Seite 10 PCIE2 (PCIE x 1 slot) is used for PCI Express cards, such as Gigabit LAN card, SATA2 card, etc. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Seite 11 To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 ASRock 939Dual-SATA2 Motherboard...
  • Seite 12 SATA II_1 devices. The current SATA II interface allows up to 3.0 Gb/s data transfer rate. It is recommended to plug SATAII HDD to SATAII connector (SATAII_1) and connect SATA HDD to SATA connector (SATA1 or SATA2). ASRock 939Dual-SATA2 Motherboard...
  • Seite 13 USB 2.0 Header ASRock 8CH I/O accommo- dates 4 default USB 2.0 ports. If (9-pin USB67) those USB 2.0 ports on the I/O (see p.2 No. 21) panel are not sufficient, this USB 2.0 header is available to...
  • Seite 14 ATX 12V plug to this connector. (see p.2 No. 4) Failing to do so will cause power up failure. Game Port Header Connect a Game cable to this header if the Game port bracket (15-pin GAME1) is installed. (see p.2 No. 26) ASRock 939Dual-SATA2 Motherboard...
  • Seite 15 HDDs must be operated in “RAID” mode. 2. “RAID” and “non-RAID” mode are options under “SATA Operation Mode” in BIOS setup. Please refer to page 30 of “User Manual” in the Support CD for details. They need different drivers during actual operation. ASRock 939Dual-SATA2 Motherboard...
  • Seite 16 SATA HDDs, you will need to make a SATA driver diskette before you start the OS installation. STEP 1: Insert the ASRock Support CD into your optical drive to boot your system. (Do NOT insert any floppy diskette into the floppy drive at this moment!) STEP 2: During POST at the beginning of system boot-up, press <F11>...
  • Seite 17 Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP. EXE” from the “BIN” folder in the Support CD to display the menus. ASRock 939Dual-SATA2 Motherboard...
  • Seite 18 ASRock 939Dual-SATA2 Motherboard...
  • Seite 19 ‘ ’ ™ ® ® ASRock 939Dual-SATA2 Motherboard...
  • Seite 20 ® ® ‘ ’ ™ ‘ ’ ™ ASRock 939Dual-SATA2 Motherboard...
  • Seite 21 ASRock 939Dual-SATA2 Motherboard...
  • Seite 22 DDR1 DDR2 DDR3 DDR4 ASRock 939Dual-SATA2 Motherboard...
  • Seite 23 ASRock 939Dual-SATA2 Motherboard...
  • Seite 24 ASRock 939Dual-SATA2 Motherboard...
  • Seite 25 ASRock 939Dual-SATA2 Motherboard...
  • Seite 26 “ ” SATA2 SATA1 SATA II_1 ASRock 939Dual-SATA2 Motherboard...
  • Seite 27 ASRock 939Dual-SATA2 Motherboard...
  • Seite 28 ASRock 939Dual-SATA2 Motherboard...
  • Seite 29 ASRock 939Dual-SATA2 Motherboard...
  • Seite 30 .. \ Information \ Manual \ RAID Installation Guide \ Chinese.pdf ASRock 939Dual-SATA2 Motherboard...
  • Seite 31 ® ® ASRock 939Dual-SATA2 Motherboard...
  • Seite 32 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock 939Dual-SATA2 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 33: Spezifikationen

    LAN: Speed: 802.3u (10/100 Ethernet), unterstützt Wake-On-LAN Hardware Monitor: Überwachung der CPU-Temperatur Motherboardtemperaturerkennung CPU-Überhitzungsschutz durch rechtzeitigen Systemshutdown (ASRock U-COP)(Siehe VORSICHT 3) Drehzahlmessung für CPU-Lüfter Drehzahlmessung für Gehäuselüfter Spannungsüberwachung: +12V, +5V, +3.3V, Vcore Future CPU Port: Unterstützt CPU-Aufrüstung von 939-poliger AMD-CPU auf zukünftige CPUs wie 940-polige CPUs (M2)
  • Seite 34 8-channel modes. Please check the table on page 3 for proper connection. Obwohl dieses Motherboard stufenlose Steuerung bietet, wird Overclocking nicht empfohlen. Frequenzen, die von den empfohlenen CPU-Busfrequenzen abweichen, können Instabilität des Systems verursachen oder die CPU beschädigen. ASRock 939Dual-SATA2 Motherboard...
  • Seite 35: Sicherheitshinweise Vor Der Montage

    Hebel nach unten drücken, bis er hörbar einrastet. Schritt 5: Installieren Sie einen aktiven CPU-Kühler, der die gesamte Fläche der CPU abdeckt und eine ausreichende Wärmeableitung für den von Ihnen verwendeten CPU-Typ bietet. Weitere Hinweise finden Sie der Installationsanleitung für Ihren CPU-Kühler. ASRock 939Dual-SATA2 Motherboard...
  • Seite 36: Installation Der Speichermodule (Dimm)

    2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) 2.2 Installation der Speichermodule (DIMM) Die Motherboards 939Dual-SATA2 bieten vier 184-pol. DDR (Double Data Rate) DIMM-Steckplätze und unterstützen die Dual-Kanal-Speichertechnologie. Für die Dual-Kanalkonfiguration dürfen Sie nur identische (gleiche Marke, Geschwindigkeit, Größe und gleicher Chiptyp) DDR DIMM-Paare in den Steckplätzen gleicher Farbe installieren.
  • Seite 37: Einsetzen Eines Dimm-Moduls

    Steckplätze zu zwingen, führt dies zu dauerhaften Schäden am Mainboard und am DIMM-Modul. Schritt 3: Drücken Sie die DIMM-Module fest in die Steckplätze, so dass die Halteklammern an beiden Enden des Moduls einschnappen und das DIMM-Modul fest an Ort und Stelle sitzt. ASRock 939Dual-SATA2 Motherboard...
  • Seite 38 Der Port für zukünftige CPUs ermöglicht Ihnen die Aufrüstung Ihrer 939-poligen AMD-CPU auf eine 940-polige AMD-CPU. Dies erreichen Sie durch die Installation eines zusätzlichen ASRock M2CPU-Boards in diesem Port für zukünftige CPUs am 939Dual-SATA2-Motherboard. Bevor Sie die 939-polige auf die 940-polige (M2) CPU aufrüsten, müssen Sie die Steckbrückeneinstellungen („Jumper“) der...
  • Seite 39: Einbau Einer Erweiterungskarte

    (PCIE x1-Steckplatz) wird für PCI Express-Karten wie Gigabit LAN-Karten, SATA II-Karten, usw. eingesetzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten. Stecken Sie KEINE 3,3V AGP-Karte in den AGP-Steckplatz dieses Motherboards! Permanente Beschädigung könnte die Folge sein...
  • Seite 40: Einstellung Der Jumper

    Pin 2). 2.6 Anschlüsse 2.6 Anschlüsse 2.6 Anschlüsse 2.6 Anschlüsse 2.6 Anschlüsse Anschlussleisten sind KEINE Jumper. Setzen Sie KEINE Jumperkappen auf die Pins der Anschlussleisten. Wenn Sie die Jumperkappen auf die Anschlüsse setzen, wird das Motherboard permanent beschädigt! ASRock 939Dual-SATA2 Motherboard...
  • Seite 41 (SATAII_1: siehe S.2 - No. 10) unterstützten SATAII- Datenkabel für interne SATA II_1 Massenspeichergeräte. Die aktuelle SATAII-Schnittstelle ermöglicht eine Datenübertragungsrate bis 3,0 Gb/s. Es wird empfohlen, die SATAII-Festplatte mit dem SATAII-Anschluss (SATAII_1) und die SATA-Festplatte mit dem SATA-Anschluss (SATA1, SATA2) zu verbinden. ASRock 939Dual-SATA2 Motherboard...
  • Seite 42 Ende des SATA- Verbindung zum Netzteil Stromversorgungskabels mit dem Stromanschluss des Netzteils. USB 2.0-Header ASRock 8CH I/O (E/A) verfügt über 4 Standard-USB 2.0- (9-pol. USB67) Anschlüsse auf der Rückseite. (siehe S.2 - Nr. 21) Wenn die hinteren USB- Anschlüsse nicht ausreichen, steht dieser USB 2.0-Header...
  • Seite 43 Verbinden Sie das CPU - Lüfterkabel mit diesem (3-pin CPU_FAN1) Anschluss und passen Sie den (siehe S.2, Punkt 3) schwarzen Draht dem Erdungsstift an. ATX-Netz-Header Verbinden Sie die ATX- Stromversorgung mit diesem (20-pin ATXPWR1) Header. (siehe S.2, Punkt 2) ASRock 939Dual-SATA2 Motherboard...
  • Seite 44 Betrieb im „RAID“-Modus Betrieb im „RAID“-Modus Betrieb im „RAID“-Modus Betrieb im „RAID“-Modus Betrieb im „RAID“-Modus Sie müssen vor der Betriebssysteminstallation eine SATA-Treiberdiskette erstellen, wenn Sie Windows 2000, Windows XP oder Windows XP 64-Bit auf Ihren SATA-Festplatten installieren möchten. ASRock 939Dual-SATA2 Motherboard...
  • Seite 45 SCHRITT 1: Legen Sie die ASRock Support-CD in Ihr optisches Laufwerk, um Ihr System hochzufahren. (Legen Sie zu diesem Zeitpunkt KEINE Diskette in das Diskettenlaufwerk ein!) SCHRITT 2: Während des Selbsttests zu Beginn des Systemstarts drücken Sie die <F11>-Taste – ein Fenster zur Auswahl des Boot-Laufwerkes (Startlaufwerk) erscheint.
  • Seite 46 ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock 939Dual-SATA2 Motherboard...
  • Seite 47 1. Introduction Merci pour votre achat d’une carte mère ASRock 939Dual-SATA2, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 48 Mesure de température de la carte mère Coupure du CPU en cas de surchauffe afin de protéger la durée de vie du CPU (ASRock U-COP)(voir ATTENTION 3) Tachéomètre ventilateur CPU; Tachéomètre ventilateur châssis Monitoring de la tension: +12V, +5V, +3.3V, Vcore Port Future CPU: Supporte une mise à...
  • Seite 49 Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Les fréquences autres que les fréquences de bus d’UC recommandées risquent de déstabiliser le système ou d’endommager l’UC. ASRock 939Dual-SATA2 Motherboard...
  • Seite 50 CPU. Le verrouillage du levier dans son encoche latérale est annoncé par un clic. Etape 5. Installez le ventilateur et le radiateur du CPU. Pour une installation correcte, reportez-vous aux manuels du fabricant du ventilateur et du radiateur de CPU. ASRock 939Dual-SATA2 Motherboard...
  • Seite 51 2.2 Installation des modules m émoire [DIMM] 2.2 Installation des modules m émoire [DIMM] La carte mère 939Dual-SATA2 dispose de quatre emplacements DIMM DDR (Double Data Rate) de 184-broches, et supporte la Technologie de Mémoire à Canal Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR identiques (de la même marque, de la...
  • Seite 52 DIMM. Etape 3. Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. ASRock 939Dual-SATA2 Motherboard...
  • Seite 53 Le future port du processeur permet une mise à jour de votre AMD de 939 pins à un AMD à 940 pins (M2) en installant une carte fille ASRock M2CPU sur ce port de la carte mère 939Dual-SATA2. Avant d’effectuer une mise à jour du processeur de 939 pins à...
  • Seite 54 Gigabit LAN, les cartes SATA II, etc. Slot AGP: Le slot AGP est utilisé pour installer une carte graphique. Le slot AGP ASRock utilise un design de fermoir spécial qui permet de fixer correctement la carte graphique insérée. Ne PAS utiliser de carte AGP 3,3V AGP sur l’emplacement AGP de cette carte mère! Cela risque de causer des dommages irréversibles!
  • Seite 55 2 et la broche 3 sur CLRTC1 pendant 3 secondes. Veuillez ne pas oublier de remettre le capuchon dans sa position par défaut (sur les broches 1 et 2) après avoir effacé la CMOS. ASRock 939Dual-SATA2 Motherboard...
  • Seite 56 Ces deux connecteurs Série ATAII (SATAII) prennent en (SATAII_1: voir p.2 No. 10) charge les câbles SATAII pour SATA II_1 les périphériques de stockage internes. L’interface SATAII actuelle permet des taux transferts de données pouvant aller jusqu’à 3,0 Gb/s. ASRock 939Dual-SATA2 Motherboard...
  • Seite 57 électrique SATA sur le connecteur d’alimentation de l’unité d’alimentation électrique. En-tête USB 2.0 L’ASRock 8CH I/O (E/S ASRock 8CH) vous fournit 4 ports USB (USB67 br.9) 2.0 par défaut situés sur le (voir p.2 No. 21) panneau arrière. Si les ports USB arrières ne sont pas...
  • Seite 58 (CPU_FAN1 br. 3) sur la broche de terre. (voir p.2 fig. 3) Connecteur d’alimentation ATX Veuillez connecter une unité d’alimentation ATX sur ce (ATXPWR1 br. 20) connecteur. (voir p.2 fig. 2) ASRock 939Dual-SATA2 Motherboard...
  • Seite 59 “RAID” Si vous voulez installer Windows 2000, Windows XP, ou Windows XP 64- bit SE sur vos lecteurs de disques durs SATA, vous aurez besoin de faire une disquette du pilote SATA avant de démarrer l’installation du SE. ASRock 939Dual-SATA2 Motherboard...
  • Seite 60 ETAPE 1 : Insérez le CD de soutien ASRock dans votre lecteur de disque optique pour démarrer votre système. (N’insérez AUCUNE disquette dans le lecteur de disquette pour l’instant !) ETAPE 2 : Pendant le POST au début du démarrage du système, appuyez sur la touche <F11>, et une fenêtre s’affiche pour la sélection des...
  • Seite 61 Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier ASSETUP.EXE dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock 939Dual-SATA2 Motherboard...
  • Seite 62 Grazie per aver scelto una scheda madre ASRock 939Dual-SATA2, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Seite 63 Sensore per la temperatura del processore Sensore temperatura scheda madre Chiusura automatica del processore in caso di surriscaldamento per proteggere la CPU (ASRock U-COP)(vedi ATTENZIONE 3) Indicatore di velocità per la ventola del processore Indicatore di velocità per la ventola di raffreddamento Voltaggio: +12V, +5V, +3.3V, Vcore...
  • Seite 64 ASRock 8CH I/O: 1 porta PS/2 per mouse, 1 porta PS/2 per tastiera 1 Porta seriale: COM 1 1 Porta parallela: supporto ECP/EPP 4 porte USB 2.0 già integrate 1 Porta RJ-45 Connettore Audio: cassa laterale / cassa posteriore /...
  • Seite 65 Quando la leva fa clic sulla linguetta laterale significa che è bloccata. Step 5. Installare la ventola del processore e l’heatsink. Per una corretta installazione, per favore fare riferimento ai manuali di istruzione dei produttori della ventola e dell’heatsink del processore. ASRock 939Dual-SATA2 Motherboard...
  • Seite 66 2.2 Installazione dei moduli di memoria (DIMM) 2.2 Installazione dei moduli di memoria (DIMM) La scheda madre 939Dual-SATA2 fornisce quattro alloggiamenti DIMM DDR (Double Data Rate) a 184 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR negli alloggiamenti...
  • Seite 67 DIMM stessa. Step 3. Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. ASRock 939Dual-SATA2 Motherboard...
  • Seite 68 (Porta CPU Future, Slot PCI, Slot PCIE ed Slot AGP) (Porta CPU Future, Slot PCI, Slot PCIE ed Slot AGP) Sulla scheda madre 939Dual-SATA2 c’è 1 porta CPU Future, 3 slot PCI, 2 slot PCIE ed 1 slot AGP. Porta CPU futura (Porta di colore giallo): La porta CPU futura consente di effettuare l’aggiornamento da AMD 939-Pin CPU a...
  • Seite 69 SATA II, ecc. Slot AGP: Lo slot AGP serve all’installazione di schede grafiche. Lo slot AGP ASRock usa uno speciale gancio che permette di fissare in sede in modo sicuro la scheda grafica. NON usare schede AGP da 3,3 V nello slot AGP di questa motherboard! Ciò...
  • Seite 70 CMOS. 2.6 Connettori 2.6 Connettori 2.6 Connettori 2.6 Connettori 2.6 Connettori I connettori NON sono jumpers. NON COLLOCARE i ponticelli sui connettori. Installando dei cappucci a ponticello sui connettori si causeranno danni permanenti alla scheda madre! ASRock 939Dual-SATA2 Motherboard...
  • Seite 71 L’interfaccia SATAII attuale permette velocità di trasferimento dati fino a 3.0 Gb/s. Si raccomanda di collegare il disco rigido SATAII al connettore SATAII (SATAII_1) e di collegare il disco rigido SATA al connettore SATA (SATA1, SATA2). ASRock 939Dual-SATA2 Motherboard...
  • Seite 72 SATA al connettore power dell’alimentatore. Collettore USB 2.0 Il dispositivo ASRock 8CH I/O mette a vostra disposizione 4 (9-pin USB67) porte USB 2.0 di default sul (vedi p.2 No. 21) pannello posteriore. Se le porte USB posteriori non sono sufficienti, è...
  • Seite 73 Collegare il cavo della ventolina CPU a questo connettore e far (3-pin CPU_FAN1) combaciare il filo nero al pin (vedi p.2 item 3) terra. Collettore alimentazione ATX Collegare la sorgente d’alimentazione ATX a questo (20-pin ATXPWR1) collettore. (vedi p.2 item 2) ASRock 939Dual-SATA2 Motherboard...
  • Seite 74 “RAID”. “RAID”. “RAID”. “RAID”. Se si desidera installare Windows 2000, Windows XP o Windows XP 64 bit su un hard disk SATA, è necessario creare un dischetto driver SATA prima di procedere con l’installazione del sistema operativo. ASRock 939Dual-SATA2 Motherboard...
  • Seite 75 1° PASSO: Inserire il CD di supporto ASRock nel lettore ottico prima di accendere il sistema. (NON inserire nessun dischetto floppy nel drive in questo momento!) 2° PASSO: Durante la fase di POST, all’inzio del boot-up del sistema, premere il tasto <F11>. Apparirà una finestra per la selezione dei dispositivi boot.
  • Seite 76 Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file ASSETUP. EXE nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. ASRock 939Dual-SATA2 Motherboard...
  • Seite 77 1. Introducción 1. Introducción Gracias por su compra de ASRock 939Dual-SATA2 placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 78 Sensibilidad a la temperatura de la placa madre, Apago automático en caso de temperature sobre-elevada del procesador para proteger el procesador (ASRock U-COP)(vea ATENCIÓN 3), Taquímetros de los ventiladores del procesador y del chasis, Monitor de Voltaje: +12V, +5V, +3.3V, Vcore Puerto de CPU Future: Admite actualización de procesador desde el procesador...
  • Seite 79 Consulte la tabla en la página 3 para una conexión correcta. Aunque esta placa base ofrece un control complete, no es recomendable forzar la velocidad. Las frecuencias de bus de la CPU distintas a las recomendadas pueden causar inestabilidad en el sistema o dañar la CPU. ASRock 939Dual-SATA2 Motherboard...
  • Seite 80 CPU, examine su orientación o examine si los pins están ya encorvados. Paso 4. Encierre el zócalo bajando la palanca. Paso 5. Instale el disipador de calor con ventilador del CPU ( consulte la documentación del disipador de calor). ASRock 939Dual-SATA2 Motherboard...
  • Seite 81 2.2 Instalación de Memoria 2.2 Instalación de Memoria La placa 939Dual-SATA2 ofrece cuatro ranuras DIMM DDR de 184 pines, y soporta Tecnología de Memoria de Doble Canal. Para la configuración de doble canal, necesitará instalar siempre pares DIMM DDR idénticos (de la misma marca, velocidad, tamaño y tipo) en las ranuras del mismo color.
  • Seite 82 DIMM. Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. ASRock 939Dual-SATA2 Motherboard...
  • Seite 83 Puerto de CPU Future, ranuras PCI, ranuras PCIE y ranuras AGP) Puerto de CPU Future, ranuras PCI, ranuras PCIE y ranuras AGP) La placa madre 939Dual-SATA2 cuenta con 1 puerto de CPU Future, 3 ranuras PCI, 2 ranuras PCIE, y 1 ranuras AGP.
  • Seite 84 PCIE2 (1 ranura PCIE) es utiliza para tarjetas PCI Express, como por ejemplo, para tarjetas Gi gabit LAN, SATA II, etc. Ranura AGP: Para instalar trajeta gráfica. La ranura AGP ASRock tiene un diseño especial de seguro para fijar con seguridad la tarjeta gráfica introducida.
  • Seite 85 CLRTC1 durante 3 segundos. No olvide volver a colocar la cubierta de jumper en su lugar original (aislando a las agujas pin1 y pin2) después de restablecer la CMOS. ASRock 939Dual-SATA2 Motherboard...
  • Seite 86 SATAII para dispositivos de almacenamiento internos. La SATA II_1 interfaz SATAII actual permite una velocidad de transferencia de 3.0 Gb/s. Se recomienda conectar el SATAII HDD al conector SATAII (SATAII_1) y conectar el SATA HDD al conector SATA (SATA1, SATA2). ASRock 939Dual-SATA2 Motherboard...
  • Seite 87 SATA a la conexión de alimentación de la fuente de alimentación. Cabezal USB 2.0 ASRock 8CH I/O le proporciona 4 puertos USB 2.0 (9-pin USB67) predeterminados en el panel (ver p.2, No. 21) posterior. Si los puertos USB posteriores no son suficientes, este cabezal USB 2.0 (USB67)
  • Seite 88 Tenga en cuenta que es necesario conectar este (4-pin ATX12V1) conector a una toma de corriente (vea p.2, No. 4) con el enchufe ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá encender. ASRock 939Dual-SATA2 Motherboard...
  • Seite 89: Configuración Raid

    PASO 1: Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) PASO 2: Durante la comprobación inicial (POST) del sistema, pulse la...
  • Seite 90 Si desea instalar el sistema operativo Windows 98 SE, Windows ME, Windows 2000, Windows XP, o Windows XP 64-bit en sus discos duros SATAII mientras operan en modo IDE, no necesita hacer un disquete de controladores SATAII antes de la instalación del sistema operativo. ASRock 939Dual-SATA2 Motherboard...
  • Seite 91 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo ASSETUP.EXE para iniciar la instalación. ASRock 939Dual-SATA2 Motherboard...

Inhaltsverzeichnis