Display Indications And Symbols - VOLTCRAFT ET-02 Bedienungsanleitung

Display Indications and Symbols

This is a summary of all possible symbols and information on the DMM
HOLD
0-ADJ
I. . .
OFF
BATT
V
V
mV
V
Ω
kΩ
EARTH VOLTAGE The measuring range for earth voltage
E
P
C
26
Data-Hold function is active
Symbol for zero balancing when measuring earth/grounding
Overload = the measuring range was exceeded
Off The DMM is switched off
Symbol for battery change required
Warning symbol for dangerous voltages (<30 V) at the measurement probes
Symbol for closed measurement circuit when measuring earth/grounding
Symbol for display illumination
Battery voltage display in the meter (battery test function)
DC Voltage
Alternating voltage
Millivolt (exp.–3)
Volt (unit of electric potential voltage)
Ohm (unit of electric resistance)
Kiloohm (exp.3)
Measuring connection for foundation earths
Measuring connection for foundation earths nearest probe (ES)
Measuring connection for farthest probe (ES)