Description Of Individual Parts; Display Indications And Symbols - VOLTCRAFT VC-20 Bedienungsanleitung

Description of individual parts

(see fold-out page)
1 Rotary switch for setting the measuring functions
2 Light button for torch function
3 MODE button for switching the measuring functions
4 Display (LCD) with function and measuring unit display
A Battery change display
B Prefix with negative measuring values
C Indicator for direct (DC) or alternating current (AC)
D Indicator for automatic range selection (Auto-Range)
E Digital measuring value display (4000 digits)
F Diode test symbol
G Symbol for the acoustic continuity check
H Display of the measuring unit
5 NCV sensor (non-contact voltage detector)
6 Illuminated NCV display (NVC = non-contact voltage detector)
7 LED torch
8 Rear plug-in device for measuring leads
9 Button for frequency and duty cycle measuring function
10 Battery compartment
11 Grip section marking on the test prods
12 Measuring contact with plug in CAT III/CAT IV covering

Display indications and symbols

AC value for alternating voltage and current
DC value for direct voltage and current
V Volt (unit of electric potential)
mV milli-Volt (exp.-3)
mA milli-Ampere (unit of electric current, exp.-3)
32