Controls; Safety Instructions - VOLTCRAFT ET-02 Bedienungsanleitung

Controls

(see fold-out page)
1 LCD display
2 0-ADJ-dial for zero comparison in the earthing measurement range
3 HOLD button to "freeze" the displayed values
4 Test button for earthing measurement
5 Dial switch
6 Light button to switch the display illumination on
7 Attachment fitting (for holding strap etc.)
8 Foldable mounting brackets
9 Battery compartment
10 Red measuring socket "VΩ-C" (plus potential)
11 Yellow measuring socket "P"
12 Green measuring socket "COM -E"

Safety Instructions

Please read through the operating instructions completely before using the product
for the first time; they include important information necessary for correct operation.
The guarantee will be void if damage is incurred resulting from non-compliance with
the operating instructions! We do not assume any liability for resulting damage!
Nor do we assume liability for damage to property or personal injury caused by
improper use or the failure to observe the safety instructions! In such cases the
guarantee is voided.
This device left the factory in perfect condition in terms of safety engineering. To maintain this condition
and ensure safe operation, you, as the user, must comply with the safety instructions and warnings con-
tained in these instructions.
The following symbols must be observed:
An exclamation mark in a triangle shows important information in this user's manual that
has to be observed.
The lightning symbol in a triangle warns against an electric shock or the impairment of the
electrical safety of the appliance.
23