Gastroback 42716 Bedienungsanleitung Seite 101

Problem Possible Reason
After using the steam func-
tion, the appliance must be
cooled down manually for
brewing.
Not enough water in the
water tank. The WATER
LOW indicator is illuminated.
The power button The overheat protection
and steam button has been triggered during a
are illuminated, brewing cycle.
the 1 cup and 2
cups buttons are
A technical problem occur-
flashing.
red.
The machine is Possibly, the overheat
switched on but protection of the pump is
ceases to operate active.
or steam escapes
You have operated the hot
from the group
water/steam function for
head.
more than 3 minutes.
The Solution
This is normal. The temperature necessary for steam pro-
duction is too high for brewing. Proceed as described in
section 'Cooling Down to Brewing Temperature'.
Pour at least 250ml cold drinking water into the water
tank. Then try again.
The machine will return to normal operation automatical-
ly, as soon as the water system cooled down sufficiently.
Simply wait. The appliance is not intended for continuous
operation. Make a break in time.
If the machine does not recover automatically within 10
minutes, switch off the appliance (press the power button)
and wait for approx. 30 minutes. Then try again.
If the problem persists, get in contact with an authorized
service centre.
Switch off the machine and unplug. Wait for 15-30
minutes. Then try again.
This is normal. Turn the hot water/steam switch back
to the vertical position and wait until the water system
reaches operating temperature again (power button is illu-
minated continuously). If required, try again.
101