F) Fade Operation; Automatic Mode; H) Operation With Static Colour Setting; I) Manual Colour Setting - Renkforce GM307 Bedienungsanleitung

f) Fade operation

• Push the button MENU until "FAdE" is displayed and push the button ENTER.
• Select the desired effect speed with the UP and DOWN buttons:
Fd01 (slow) > Fd15 (fast)
• Press the ENTER button to confirm your selection.
g) Automatic mode
• Push the button MENU until "AUtO" is displayed and push the button ENTER.
In automatic mode, the device will automatically switch the light effects.

h) Operation with static colour setting

• Push the button MENU until "COLO" is displayed and push the button ENTER.
• Select the desired colour "CL00" to "CL11" with the UP and DOWN buttons.
• Press the ENTER button to confirm your selection.
• Set the desired strobe speed with the buttons UP or DOWN:
FL00 (slow) > FL15 (fast)
• Press the ENTER button to confirm your selection.

i) Manual colour setting

• Push the button MENU until "NAnU" is displayed and push the button ENTER.
• Set the brightness share of the colours red, green and blue with the buttons UP or DOWN to produce the
desired mixed colour:
r000-r255
G000-G255
b000-b255
• Confirm your selection with ENTER.

j) Blackout mode

• Push the button MENU until "bLnd" is displayed and push the button ENTER.
• Use the buttons UP or DOWN to select the desired operating mode:
NO Blackout not active (light on)
YES Blackout active (light off)
• Press the ENTER button to confirm your selection.
Red colour share dark > bright
Green colour share dark > bright
Blue colour share dark > bright
37