E) Colour Change Operation; F) Fade Operation; Automatic Mode; H) Operation With Static Colour Setting - Renkforce MINIPAR 18 x 1 W Bedienungsanleitung

e) Colour change operation

• Push the button MENU (3) until "JUNP" is displayed and push the button ENTER (6).
• Select the desired effect speed with the UP (4) and DOWN (5) buttons:
JU01 (slow) > JU20 (fast)
• Press the ENTER button (6) to confirm your selection.
• Set the desired strobe speed with the buttons UP (4) or DOWN (5):
FL-0 (slow) > FL-4 (fast)
• Press the ENTER button (6) to confirm your selection.

f) Fade Operation

• Push the button MENU (3) until "FAdE" is displayed and push the button ENTER (6).
• Select the desired effect speed with the UP (4) and DOWN (5) buttons:
Fd01 (slow) > Fd15 (fast)
• Press the ENTER button (6) to confirm your selection.
g) Automatic mode
• Push the button MENU (3) until "AUtO" is displayed and push the button ENTER (6).
In automatic mode, the device will automatically switch the light effects.

h) Operation with Static Colour Setting

• Push the button MENU (3) until "COLO" is displayed and push the button ENTER (6).
• Select the desired colour setting "C001" to "C255" with the UP (4) and DOWN (5) buttons.
• Press the ENTER button (6) to confirm your selection.
• Set the desired strobe speed with the buttons UP (4) or DOWN (5):
FL00 (slow) > FL15 (fast)
• Press the ENTER button (6) to confirm your selection.
43