Ändern Des Split Points; Changing The Split Point; Einstellen Der Lautstärke Im Pop-Up-Fenster - Classic Cantabile Apollon Bedienungsanleitung

Call up the Split mode.
To call up the split mode, press the SPLIT button. Lamp lights and the split is set on.
The split pop-up display appears.
3. Wählen Sie nun die Split-Voice wie zuvor unter
beschrieben.
Ändern des Split Points
Select the split voice.
Sie können den Split Point, der die Trennung zwischen Main-Voice und Split-Voice
Select a voice in the normal way. (see the SELECTING VOICES section on page 16)
darstellt, jeder beliebigen Taste zuweisen.

CHANGING THE SPLIT POINT

1. Rufen Sie den Split-Modus auf, indem Sie den Knopf SPLIT drücken. Die Kontrolllampe
You can set the point dividing the split voice and main voice ranges at any desired key position.
leuchtet auf und das entsprechende Pop-Up-Fenster erscheint.
Call up the split mode.
2. Bewegen Sie den Cursor zum Punkt „Split Point" im Pop-Up-Fenster des Split-Modus,
the split is set on. The split pop-up display appears.
indem Sie ENTER drücken.
Move the cursor to the split point value in the split pop-up display.
3. Sie können nun den Split Point mit Hilfe der Tasten DATA + oder - ändern (B2-C#7).
Press the ENTER button in the split pop-up display until the cursor goes to the split point option.
Wenn Sie die Tasten gleichzeitig drücken, wird die Grundeinstellung (F#4) wieder
Change the split point option.
aufgerufen. Sie können auch hier wieder die Funktion „Display Hold" nutzen.
Change the split point by using the DATA UP and DOWN buttons . (default value: F#4, Range: B2~C#7)
4. Wenn die Funktion „Display Hold" aktiviert ist, kehren Sie zum Hauptmenü zurück,
If you press both DATA UP and DOWN buttons at the same time automatically return to the default value (F#4).
indem Sie EXIT drücken. Anderenfalls kehrt das Display nach 3 Sekunden selbständig
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen shows the current pop-up display.
dorthin zurück.
Return to the main menu.
Even if you don't press the EXIT button, the pop-up display automatically returns to the main menu after 3 seconds. But if
the Display hold is on, you should press the EXIT button to return to the main menu.
Sie können den Split Point auch einstellen, indem Sie den Knopf SPLIT gedrückt halten
Instead of above way, the split point can be assigned by using the SPLIT button with the keyboard.
und dann die Taste betätigen, die den Split Point darstellen soll.
Press and hold down the SPLIT button and press a desired key. The pressed key is assigned to new split point.
Split
Split
Split
Split
ADJUSTING THE SPLIT VOLUME
ADJUSTING THE SPLIT VOLUME
ADJUSTING THE SPLIT VOLUME
ADJUSTING THE SPLIT VOLUME
This determines the volume of the split voice. There two ways to adjust the split volume.
Einstellen der Lautstärke im Pop-Up-Fenster
This determines the volume of the split voice. There two ways to adjust the split volume.
This determines the volume of the split voice. There two ways to adjust the split volume.
This determines the volume of the split voice. There two ways to adjust the split volume.
A. Adjusting the SPLIT VOLUME in the split pop-up display.
A. Adjusting the SPLIT VOLUME in the split pop-up display.
A. Adjusting the SPLIT VOLUME in the split pop-up display.
A. Adjusting the SPLIT VOLUME in the split pop-up display.
1. Rufen Sie den Split-Modus auf, indem Sie den Knopf SPLIT drücken. Die
Call up the split mode.
Call up the split mode.
Kontrolllampe leuchtet auf und das entsprechende Pop-Up-Fenster
Call up the split mode.
Call up the split mode.
To call up the split mode, press the SPLIT button. Lamp lights and the split is set
To call up the split mode, press the SPLIT button. Lamp lights and the split is set
erscheint. To call up the split mode, press the SPLIT button. Lamp lights and the split is set
To call up the split mode, press the SPLIT button. Lamp lights and the split is set
on. The split pop-up display appears.
on. The split pop-up display appears.
on. The split pop-up display appears.
on. The split pop-up display appears.
2. Drücken Sie ENTER, die Grundeinstellung der Lautstärke (60) wird
Move the cursor to volume value in the split pop-up display.
angezeigt.
Move the cursor to volume value in the split pop-up display.
Move the cursor to volume value in the split pop-up display.
Move the cursor to volume value in the split pop-up display.
Press the ENTER button in the split pop-up display until the cursor goes to volume
3. Stellen Sie die Lautstärke nach Ihren Wünschen (0-100) ein, indem Sie die
Press the ENTER button in the split pop-up display until the cursor goes to volume
Press the ENTER button in the split pop-up display until the cursor goes to volume
Press the ENTER button in the split pop-up display until the cursor goes to volume
value (default 60).
Tasten DATA + oder - benutzen. Wenn Sie die Tasten gleichzeitig drücken,
value (default 60).
value (default 60).
value (default 60).
Adjust the split voice volume.
wird die Grundeinstellung wiederhergestellt. Halten Sie eine der Tasten
Adjust the split voice volume.
Adjust the split voice volume.
Adjust the split voice volume.
Adjust the split Volume by using the DATA UP and DOWN buttons .
gedrückt, um die Einstellung kontinuierlich vorzunehmen. Das Pop-Up-
Adjust the split Volume by using the DATA UP and DOWN buttons .
Adjust the split Volume by using the DATA UP and DOWN buttons .
Adjust the split Volume by using the DATA UP and DOWN buttons .
If you press both DATA UP and DOWN buttons at the same time automatically return to the
Fenster kehrt nach 3 Sekunden zum Hauptmenü zurück. Wenn Sie jedoch
If you press both DATA UP and DOWN buttons at the same time automatically return to the
default Split Volume(60). The range of volume is 0 ~ 100. If you press both DATA UP and DOWN buttons at the same time automatically return to the
If you press both DATA UP and DOWN buttons at the same time automatically return to the
default Split Volume(60). The range of volume is 0 ~ 100.
die Funktion „Display Hold" aktivieren, bleibt das Pop-Up-Fenster dauerhaft default Split Volume(60). The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
default Split Volume(60). The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
Hold the button for continuous decrementing or incrementing. If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD
Hold the button for continuous decrementing or incrementing.
stehen und kehrt nicht zum Hauptmenü zurück.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD
screen shows the current pop-up display.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD
4. Wenn die Funktion „Display Hold" aktiviert ist, kehren Sie zum
screen shows the current pop-up display.
screen shows the current pop-up display.
screen shows the current pop-up display.
Return to the main menu.
Hauptmenü zurück, indem Sie EXIT drücken. Anderenfalls kehrt das
Return to the main menu.
Return to the main menu.
Return to the main menu.
Even if you don't press the EXIT button, the pop-up display automatically returns to the main
Display nach 3 Sekunden selbständig dorthin zurück.
menu after 3 seconds. But if the Display hold option is on, you should press the EXIT button to
Even if you don't press the EXIT button, the pop-up display automatically returns to the main
Even if you don't press the EXIT button, the pop-up display automatically returns to the main
Even if you don't press the EXIT button, the pop-up display automatically returns to the main
return to the main menu.
menu after 3 seconds. But if the Display hold option is on, you should press the EXIT button to
menu after 3 seconds. But if the Display hold option is on, you should press the EXIT button to
menu after 3 seconds. But if the Display hold option is on, you should press the EXIT button to
return to the main menu.
return to the main menu.
return to the main menu.
B. Adjusting the SPLIT VOLUME by using the SPLIT VOLUME UP and DOWN keys.
B. Adjusting the SPLIT VOLUME by using the SPLIT VOLUME UP and DOWN keys.
B. Adjusting the SPLIT VOLUME by using the SPLIT VOLUME UP and DOWN keys.
B. Adjusting the SPLIT VOLUME by using the SPLIT VOLUME UP and DOWN keys.
Call up the volume pop-up display.
Call up the volume pop-up display.
Call up the volume pop-up display.
Call up the volume pop-up display.
Press and hold down the SETUP/KEYPAD button and press the SPLIT VOLUME
UP or DOWN key. The volume pop-up display appears.
Press and hold down the SETUP/KEYPAD button and press the SPLIT VOLUME
Press and hold down the SETUP/KEYPAD button and press the SPLIT VOLUME
Press and hold down the SETUP/KEYPAD button and press the SPLIT VOLUME
UP or DOWN key. The volume pop-up display appears.
UP or DOWN key. The volume pop-up display appears.
UP or DOWN key. The volume pop-up display appears.
Adjust the Split Volume.
Adjust the Split Volume.
Adjust the Split Volume.
Adjust the split volume by using the SPLIT VOLUME UP and DOWN keys .
Adjust the Split Volume.
Adjust the split volume by using the SPLIT VOLUME UP and DOWN keys .
Adjust the split volume by using the SPLIT VOLUME UP and DOWN keys .
If you press both Volume UP and DOWN Keys at the same time automatically return to the
To call up the split mode, press the SPLIT button. Lamp lights and
Press the EXIT button.
Split point (F4#)
20
Press the EXIT button.
Press the EXIT button.
Press the EXIT button.
Press the EXIT button.
„Auswahl der Sounds
The default values:
1) Voice
2) Split Point
2) Volume
3) Pedal
4) Octave
(Voices)"
ACOUST BASS
F#4
060
OFF
0