Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Drücken Sie REVERB DEPTH + oder - (0-100). Ein Pop-Up-Fenster
erscheint. Sie können dieses Fenster auch aufrufen, indem Sie ENTER
drücken.
3. Drücken Sie ENTER bis das Instrument erscheint, das Sie einstellen
möchten.
4. Benutzen Sie die Tasten REVERB DEPTH + oder - um das Hall-Level
einzustellen. Sie können auch die Tasten DATA + oder - dazu
verwenden. Wenn Sie die Tasten gleichzeitig drücken, wird die
Grundeinstellung (Main Voice 70, Layer Voice 70, Split Voice 70, Chords
70, Bass 20, Drum 40) wiederhergestellt. Halten Sie eine der Tasten
gedrückt, um die Einstellung kontinuierlich vorzunehmen. Das Pop-Up-
Fenster kehrt nach 3 Sekunden zum Hauptmenü zurück. Wenn Sie jedoch
die Funktion „Display Hold" aktivieren, bleibt das Pop-Up-Fenster dauerhaft
stehen und kehrt nicht zum Hauptmenü zurück.
5. Kehren Sie zum Hauptmenü zurück, indem Sie den SETUP/KEYPAD-
Knopf wieder loslassen.
Effekt
Dieser Regler verleiht dem Sound zusätzliche Fülle. Es gibt acht verschiedene Chorus-
Arten: Chorus 1, 2, 3, 4, Feedback, Flanger, Short Delay und Feedback Delay.
s to the sound. There are four different Chorus types: Chorus 1, 2, 3, 4 , Feedback, Flanger
k Delay.
Spielen mit Effekt
F
Drücken Sie EFFECT um den Effekt einzuschalten. Die Kontrolllampe leuchtet auf und
s the EFFECT button. The lamp lights and effect is set on. The effect pop-up
das Pop-Up-Fenster erscheint.
s the EFFECT button again. The lamp turns off and effect is no longer active.
Um den Effekt wieder abzuschalten, drücken Sie erneut EFFECT. Die Kontrolllampe
erlischt.
FECT TYPE
on. The effect pop-up display appears in the LCD screen.
Auswahl eines Effekts
type by using the DATA UP and DOWN buttons in the effect pop-up display.
y shows the current effect type and total depth of the effect.
Drücken Sie EFFECT um den Effekt einzuschalten und wählen Sie dann im Pop-Up-
n the piano. Chorus 1, Chorus 2,Chorus 3, Chorus 4 , Feedback, Flanger Short delay and Feedback Delay
Fenster mit Hilfe der Tasten DATA + oder - den gewünschten Effekt aus. Das Pop-Up-
n the effect is on, press and hold down the SETUP/KEYPAD button and press
Fenster zeigt den gegenwärtig eingestellten Effekt und dessen Level. Das Piano verfügt
he effect pop-up display appears.
über 8 verschiedene Reverbs: Room 1, Room 2 (Werkseinstellung), Room 3, Halle 1,
changed by using DATA UP and DOWN buttons in this pop-up display.
Halle 2, Plate, Delay und Pan Delay.
P/KEYPAD button, the pop-up display returns to the main menu.
Wenn der Effekt eingeschaltet ist, können Sie SETUP/KEYPAD gedrückt halten und dann
im Fenster mit den Tasten DATA + oder - die Art des Efekts ändern. Wenn Sie SETUP/
KEYPAD wieder loslassen, kehrt das Fenster zum Hauptmenü zurück.
ADJUSTING THE DEPTH FOR EACH PART
The reverb part depth parameter lets you make different reverb depth setting for
the rhythm, bass and chord parts of the auto-accompaniment, as well as the
the rhythm, bass and chord parts of the auto-accompaniment, as well as the
the rhythm, bass and chord parts of the auto-accompaniment, as well as the
The reverb part depth parameter lets you make different reverb depth setting for
parts you play from key board.
parts you play from key board.
parts you play from key board.
the rhythm, bass and chord parts of the auto-accompaniment, as well as the
Call up the SETUP/KEYPAD mode.
parts you play from key board.
Call up the SETUP/KEYPAD mode.
Call up the SETUP/KEYPAD mode.
Press and hold down the SETUP/KEYPAD button. The setup pop-up appears in
Press and hold down the SETUP/KEYPAD button. The setup pop-up appears in
Press and hold down the SETUP/KEYPAD button. The setup pop-up appears in
Call up the SETUP/KEYPAD mode.
the LCD screen.
the LCD screen.
the LCD screen.
Press and hold down the SETUP/KEYPAD button. The setup pop-up appears in
the LCD screen.
Call up the reverb depth pop-up display.
Call up the reverb depth pop-up display.
Call up the reverb depth pop-up display.
Press the REVERB DEPTH UP or DOWN key. The reverb depth pop-up appears.
Press the REVERB DEPTH UP or DOWN key. The reverb depth pop-up appears.
Call up the reverb depth pop-up display.
Press the REVERB DEPTH UP or DOWN key. The reverb depth pop-up appears.
The reverb depth pop-up display can be called up from the reverb pop-up display.
The reverb depth pop-up display can be called up from the reverb pop-up display.
The reverb depth pop-up display can be called up from the reverb pop-up display.
Press the REVERB DEPTH UP or DOWN key. The reverb depth pop-up appears.
When the LCD screen shows the reverb pop-up display, press the ENTER button. The reverb depth pop-
When the LCD screen shows the reverb pop-up display, press the ENTER button. The reverb depth pop-
When the LCD screen shows the reverb pop-up display, press the ENTER button. The reverb depth pop-
up appears.
up appears.
The reverb depth pop-up display can be called up from the reverb pop-up display.
up appears.
When the LCD screen shows the reverb pop-up display, press the ENTER button. The reverb depth pop-
Move the cursor to the desired part.
Move the cursor to the desired part.
up appears.
Move the cursor to the desired part.
Press the ENTER button until the cursor is located at the desired part.
Press the ENTER button until the cursor is located at the desired part.
Press the ENTER button until the cursor is located at the desired part.
Move the cursor to the desired part.
Adjust the depth of the selected part.
Adjust the depth of the selected part.
Press the ENTER button until the cursor is located at the desired part.
Adjust the depth of the selected part.
Adjust the depth of the selected part by using the REVERB DEPTH UP and
Adjust the depth of the selected part by using the REVERB DEPTH UP and
Adjust the depth of the selected part by using the REVERB DEPTH UP and
Adjust the depth of the selected part.
DOWN keys .
DOWN keys .
DOWN keys .
Adjust the depth of the selected part by using the REVERB DEPTH UP and
You can use the DATA UP and DOWN buttons instead of the REVERB DEPTH UP and DOWN keys.
You can use the DATA UP and DOWN buttons instead of the REVERB DEPTH UP and DOWN keys.
You can use the DATA UP and DOWN buttons instead of the REVERB DEPTH UP and DOWN keys.
DOWN keys .
If you press both UP and DOWN Keys at the same time automatically return to the default reverb
If you press both UP and DOWN Keys at the same time automatically return to the default reverb
If you press both UP and DOWN Keys at the same time automatically return to the default reverb
depth of each part. (default Main Voice 70, Layer Voice 70, Split Voice 70, Chord parts 70, Bass 20, Drum 40)
depth of each part. (default Main Voice 70, Layer Voice 70, Split Voice 70, Chord parts 70, Bass 20, Drum 40)
You can use the DATA UP and DOWN buttons instead of the REVERB DEPTH UP and DOWN keys.
depth of each part. (default Main Voice 70, Layer Voice 70, Split Voice 70, Chord parts 70, Bass 20, Drum 40)
The range of volume is 0 ~ 100.
The range of volume is 0 ~ 100.
If you press both UP and DOWN Keys at the same time automatically return to the default reverb
The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
Hold the button for continuous decrementing or incrementing.
depth of each part. (default Main Voice 70, Layer Voice 70, Split Voice 70, Chord parts 70, Bass 20, Drum 40)
Hold the button for continuous decrementing or incrementing.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen
The range of volume is 0 ~ 100.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen
shows the current pop-up display.
shows the current pop-up display.
Hold the button for continuous decrementing or incrementing.
shows the current pop-up display.
If the DISPLAY HOLD is on, the pop-up display does not return to main menu and the LCD screen
Return to play mode.
Return to play mode.
shows the current pop-up display.
Return to play mode.
Release the SETUP/KEYPAD button.
Release the SETUP/KEYPAD button.
Release the SETUP/KEYPAD button.
Return to play mode.
Release the SETUP/KEYPAD button.
24
24
24
24
Werbung
Inhaltsverzeichnis
