Cleanmaxx Z 08925 Gebrauchsanleitung Seite 29

4. If you need to clean the plastic dust fi lter, you have to remove the dust bin cover fi rst by
turning it conterclockwise and pulling it off. NOTE: Orientation marks for the removal
and placement of the cover are provided on the cover and dust bin. You can remove
the cover when the ▼ mark on the lid is pointing towards the  mark on the dust bin.
8. Place the dust container lid with the plastic dust fi lter back onto the dust container.
NOTE: Orientation marks for the removal and placement of the cover are provided
on the cover and dust bin. Place the lid on the dust bin. The ▼ mark on the lid has
to point to the  mark on the dust bin. Turn the lid clockwise until the ▼ mark on the
lid is pointing to the  mark on the dust bin.
9. Place the dust fi lter back in the dust container lid. Close the dust container lid. Make
sure that the latch on the dust container lid is locked in place correctly.
10. Place the dust container into the device: Hold it by the handle and place the bot-
tom of the container into the device fi rst. Then push the handle against the device
housing until the dust container is heard to lock in place. Hold the device by the
handle and lift it to check that the dust container is in the correct position.
08925_DE-GB-FR-NL_V0.indb 29 08925_DE-GB-FR-NL_V0.indb 29
5. Then, remove the dust bin cover from the plastic dust fi l-
ter. The cover is sitting on the plastic dust fi lter. In order to
remove it, push the cover down.
6. If necessary, thoroughly rinse the plastic dust fi lter with
clear, lukewarm water. CAUTION: Do not under any cir-
cumstances clean the dust container in a washing
machine or dishwasher! Then shake off any excess wa-
ter and allow the dust container to dry completely in the
air.
7. If necessary, wipe the dust bin cover with a wet cloth and
place tht plastic dust fi lter back into the dust bin cover.
Make sure that the fi lter locks correctly into place.
29
26.05.2014 09:20:37 26.05.2014 09:20:37