Herunterladen Inhalt Inhalt Diese Seite drucken

Clock Functions - JUNO JB131D8 Benutzerinformation

Vorschau ausblenden Andere Handbücher für JB131D8:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CLOCK FUNCTIONS

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
SET+GO
MINUTE MINDER
00:00
COUNT UP TIMER
Setting and changing the time
After the first connection to the mains, wait
until the display shows
flashes.
1. Touch
or
2. Touch
or
3. Touch
or
4. Touch
or
The display shows the new time.
To change the time of day touch
and again until
Setting the DURATION
1. Set an oven function and temperature.
2. Touch
again and again until
starts to flash.
3. Use
or
to set the minutes for
DURATION time.
4. Touch
or the DURATION time
starts automatically after 5 seconds.
Application
To show or change the time of day. You can change the
time of day only when the appliance is on.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the appliance is off.
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of
the appliance. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not activated if DURA‐
TION and END are set.
and 12:00. "12"
to set the hours.
.
to set the minutes.
.
again
starts to flash.
5. Use
or
to set the hours for
DURATION time.
6. Touch
. The DURATION time starts
automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
setting flash in the display. The appliance
deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.
Setting the END
1. Set an oven function and temperature.
2. Touch
again and again until
starts to flash.
3. Use
or
to set the END and
or
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
11
and time
and the

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis