JUNO JB131D8 Benutzerinformation Seite 12

12
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
Setting the TIME DELAY
function
1. Set an oven function and temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch .
5. Use or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing
7. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and the time setting flash in the
display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
When the Time delay function
is activated, the display shows
a static symbol of the oven
function,
The dot shows which clock
function is on in the Clock /
residual heat display.
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
.
with a dot and .
1. Set an oven function (or a programme)
and temperature.
2. Set the DURATION.
3. Touch again and again until
flashes in the display.
4. Touch to set the SET+GO function.
The display shows
indicator. This indicator shows which clock
function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
1. Touch .
and "00" flash in the display.
2. Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use or to set the MINUTE
MINDER and
4. Touch or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00 and
flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
COUNT UP TIMER
1. To reset the Count Up Timer, touch
again and again until
display.
2. Touch until the display shows
"00:00" and the Count Up Timer starts
to count up again.
and with an
to confirm.
flashes in the