Connecting The Evaporator; Connecting The Light; Connecting The Fan (Optional); Connecting The Optional Power Booster - Sentiotec CK 41 Montage- Und Gebrauchsanweisung

Instructions for installation and use

5.2. Connecting the evaporator

● Guide the evaporator lines through the installation opening A (connection
area for 230 V / 400 V K) into the housing lower part 1 and connect to the
terminal L according to the circuit diagram (Fig. 6).

5.3. Connecting the light

● Guide the light lines through the installation opening J (connection area for
230 V / 400 V K) into the housing lower part 1 1 and connect to the termi-
nal m according to the circuit diagram (Fig. 6).

5.4. Connecting the fan (optional)

● Guide the fan lines through the installation openings J (connection area for
230 V / 400 V K) into the housing lower part 1 and connect to the terminal m
according to the circuit diagram (Fig. 6).

5.5. Connecting the optional power booster

● Guide the line for the connection to terminals ST1, ST2, ST3 of the power
booster through installation opening J (connection area for 230 V / 400 V K)
into the housing lower part 1 and connect according to the installation
instructions of the power booster.
WORLD OF WELLNESS
p. 16/44