Sentiotec CK 41 Montage- Und Gebrauchsanweisung Seite 67

Instructions for use for the user
2. Automatic mode
Operation starts with the programmed settings (see chapter 6 and 12)
1. Automatic:
to activate the automatic mode
2. Start of heating:
to set the automatic start of heating
for a time from 0–24, e.g. [18:00]
3. Heating duration:
to set the heating duration of 1 minute to 6 hours
e.g. [02:30] hours and minutes
4. Temperature:
15–110 °C in sauna mode, e.g. sauna mode [95 °C]
and
10–80 °C in climate mode
5. Fan speed:
0–100%, e.g. [50%]
6. Relative humidity (in climate mode only):
10–80% e.g. [70%]
The settings can be changed when using the sauna and climate modes. Sauna
operation is automatically stopped after a specified heating duration. In the cli-
mate mode, a night-drying program follows the heating duration (see chapter 15).
Note: What is the target value or the actual value?
Target value = is the value that you set and would like to have.
e.g. 90 °C
Actual = is the current value in the cabin.
e.g. 85 °C
WORLD OF WELLNESS
p. 23/44
EN