Climate Operating Mode. Manual Operation - Quick Start - Sentiotec CK 41 Montage- Und Gebrauchsanweisung

Instructions for use for the user
8.5. Climate operating mode. Manual operation – quick start
1. Switching on the sauna control unit
Press operating switch
Press ON/OFF button
● In the display
5
e.g.:
SAUNA/CLIMATE OFF
Parameter
2. Setting climate mode
Press B SAUNA button.
3. Entering the heating duration (00:00–6:00)
● Use the UP/DOWN buttons
● Press the PROG/OK
CLIMATE
Heating duration
● Use the UP/DOWN buttons
● Press the PROG/OK
CLIMATE
Heating duration
After approx. 1 second the following appears in the display:
CLIMATE
Heating duration
The heating duration has been set.
WARNING
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the
sauna heater before you activate automatic mode.
WORLD OF WELLNESS
.
1
.
3
the last status displayed before switching on appears,
Value
to scroll to the Heating duration display
7
button, in the display
6
SET
06:00 or the last set value.
to set the required value, e.g. [02:30]:
7
button, in the display
6
SEND
02:30
OFF
STOP
the following appears:
5
the following appears:
5
p. 31/44
EN