G&D Audio-Transceiver-Fiber Installationsanleitung Seite 31

Transmission – Tx: Insert the LC plug of a fibre optic cable. Connect the other end of
the cable to the
Transmission – Rx
Transmission – Rx: Insert the LC plug of a fibre optic cable. Connect the other end of
the cable to the
Transmission – Tx
NOTE: Digital signal extenders of the
incoming audio signals. The analogue (
) can be used at the remote station.
Audio – Out
The variant Audio-Transceiver-Fiber-ANALOG
faces.
Use a RCA (Cinch) audio cable to connect the computer's SPDIF-
Digital Audio – Out:
In interface to this interface.
Use a RCA (Cinch) audio cable to connect the computer's SPDIF-
Digital Audio – In:
Out interface to this interface.
Use the supplied audio cable to connect the computer's Line-Out
Line In/Micro In:
interface to this interface.
You can also connect a microphone to this interface.
Line Out/Speaker: Use the supplied audio cable to connect the computer's Line-In
interface to this interface.
You can also connect speakers or a headset to this interface.
Power: Connect the portable power pack to this interface.
interface of the signal extender at the console.
interface of the signal extender at the console.
Audio-Transceiver
Line Out ) or the digital audio signal (
does not provide any
Installation
series automatically convert
digital audio
Audio-Transceiver-Fiber · 5
Digital
inter-