Technical Data; General Signal Extender Features - G&D Audio-Transceiver-Fiber Installationsanleitung

Technical data

Technical data

General signal extender features

AUDIO-TRANSCEIVER-FIBER
Analog audio
Digital audio
 not supported by
 ANALOG variant
Data transmission
between extenders
Power supply
Casing
Operational
environment
Conformity
16 · Audio-Transceiver-Fiber
Audio connector:
Sampling rate:
Resolution:
Bandwidth:
Microphone pre-amplification
Input voltage
Output voltage
Audio connector:
Signal:
Sampling rate:
Resolution:
Bandwidth:
Interface:
Transmission length:
Type:
Connector:
Current consumption:
Power consumption:
Material:
Dimensions (W × H × D):
Weight:
Temperature:
Air humidity:
1 × 3.5 mm jack plug (Line In)
1 × 3.5 mm jack plug (Line Out)
96kS/s (Line In)
192kS/s (Line Out)
24 bit
22 Hz - 22 kHz
Max. 24 dB
Max. 1 Vrms
Max. 1 Vrms
1 × RCA socket (Digital Audio – In)
1 × RCA socket (Digital Audio – Out)
SPDIF, Consumer, PCM Stereo
44.1 - 192 kS (Digital Audio – In)
48; 96 or 192 kS (Digital Audio – Out)
24 bit
22 Hz - 22 kHz
1 × LC duplex socket
 see features of transmission
modules
Portable power pack
Mini-DIN 4 socket
Max. 300 mA @ 12 VDC
Max. 2.0 W @ 12VDC
Anodised aluminium
105 × 26 × 84 mm
Approx. 220 g
+5 to+45 °C
< 85%, non-condensing
CE, RoHS