Introduction; Package Contents - G&D Audio-Transceiver-Fiber Installationsanleitung

Introduction

By using two signal extenders of the
audio signals between a computer and a remote console via fiber optic connection.
Audio signals are transmitted in both directions between the connected extenders.
NOTE:
Signal extenders of the
two variants:
 Audio-Transceiver-Fiber(S)
over distances up to 10 kilometers.
 Audio-Transceiver-Fiber(M)
over distances up to 550 meters.
A rotary switch lets you amplify the analogue audio signal coming in at the interface
Line In/Micro In (see page 7).

Package contents

IMPORTANT: Transmitting audio signals requires two signal extenders. The package
contents given below refer to one device.
 1 × Signal extender
 1 × Portable power pack
 1 × Power cable
 1 × Audio cable (Audio-M/M-2-ferrite)
 1 × RCA audio cable (Audio-SPDIF-COAX-M/M-2)
NOTE: The variant
Audio-Transceiver-Fiber-ANALOG
interfaces. Therefore the package contents do not include any RCA audio cables.
 1 × Service cable (USB-Service-2)
 1 × Manual
Audio-Transceiver-Fiber
Audio-Transceiver-Fiber
transmits signals via single-mode optical fibers
transmits signals via multi-mode optical fibers
Audio-Transceiver-Fiber
series, you can transmit
series are provided in
does not provide any
Audio-Transceiver-Fiber · 3
Introduction
digital audio