Installation - G&D Audio-Transceiver-Fiber Installationsanleitung

Installation

Installation
Transmitting audio data between a computer and a remote console requires two sig-
nal extenders of the
Place one signal extender next to a computer. Place the second signal extender next
to the console's input and output devices.
IMPORTANT: The devices use components with laser technology complying with
laser class 1.
They meet the requirements in accordance to
U.S. CFR 1040.10 and
Please consider the following safety instructions regarding this matter:
 Avoid direct eye exposure to beam on page 2
 Always connect optical connections or cover them with protection caps on page 2
 Only use G&D certified transmission modules on page 2
Connecting a signal extender to a computer
Link Status
Transmission
NOTE: The variant
interfaces.
IMPORTANT: The devices use components with laser technology complying with
laser class 1.
Do not use optical instruments to look into the beam!
NOTE: Remove the protection caps from the Transmission interface and cable plugs.
4 · Audio-Transceiver-Fiber
Audio-Transceiver-Fiber
1040.11 .
Audio
Service
Power
Audio-Transceiver-Fiber
Audio-Transceiver-Fiber-ANALOG
series.
EN 60825-1:2014
Digital Audio
Line In/
Micro In
In
Out
does not provide any
as well as
Line Out/
2 3
Speaker
1 4
0 5
9 6
8 7
digital audio