C) Installing The Smartphone Holder; D) Make The Model Ready To Start - Reely Blackster R6 FPV Bedienungsanleitung

c) Installing the Smartphone holder

Install the Smartphone holder on the transmitter (figure 15) and insert your Smartphone in the holder as shown in
figure 15. The holder is suitable for Smartphones with a width of max. 80 mm. When installing your Smartphone,
ensure that you neither damage the housing nor push/damage any buttons. Observe a tight fit of the Smartphone
during transport or operation of the transmitter.

d) Make the model ready to start

Make your quadrocopter ready for operation by inserting/connecting the flight battery, binding the quadrocopter to the
activated transmitter, installing the camera on the holder and connecting the connection cable of the camera to the
quadrocopter (see figure 16).
56
Figure 15
Figure 16