B) Charge Flight Battery - Reely Blackster R6 FPV Bedienungsanleitung

b) Charge flight battery.

Do not use any computer or notebook USB port for power supply to the USB charger because it may be damaged.
USB ports also usually are limited to a current of max. 500 mA (USB 3.0 approx. 900 mA).
Use a suitable plug-in mains adapter or a cigarette lighter adapter with one USB output socket each (output 5 V/DC,
at least 1 A).
Connect the charger from the delivery (1) to a USB mains adapter (2) or a cigarette lights USB adapter with its USB
plug. The plug-in charger (or adapter) must have a current resilience of at least 1 A! Then connect the plug-in charger
to a mains socket. Connect the flight battery (4) to the charger socket (5) in the correct polarity. Observe the plug
contour for this.
If the battery is not defective (high-Ohmic/interrupted) and mains supply is warranted, charging commences. This is
indicated by the LED (3 = charge display).
The following LED displays are possible:
LED is permanently lit: The charging process is running
LED off: Charging end is reached or no rechargeable battery or a fully charged battery is connected
Figure 2
43