B) Charge Flight Battery - Reely Blackster R7 FPV Bedienungsanleitung

b) Charge flight battery.

Do not use any computer or notebook USB port for power supply to the USB charger because it may be damaged.
USB 2.0 ports also usually are limited to a current of max. 500 mA (USB 3.0 = 900 mA).
Use a suitable plug-in mains adapter (not enclosed, please order separately) or a cigarette lighter adapter with one
USB output socket each (output 5 V/DC, at least 1 A).
Connect the charger from the delivery (1) to a USB mains adapter (2; not enclosed, only illustrated as an example)
or a cigarette lighter USB adapter with its USB plug. The plug-in charger (or adapter) must have a current resilience
of at least 1 A!
Then connect the plug-in charger to a mains socket. Connect the flight battery (4) to the balancer connection (5) at the
charging socket (6) in the correct polarity. Observe the plug contour for this. If the battery is not defective (high-Ohmic/
interrupted) and mains supply is warranted, charging commences. This is signalled by the red LED (3 = charging
display; integrated in the device).
The following LED displays are possible:
LED is permanently lit:
LED off:
44
The charging process is running
Charging end is reached or no rechargeable battery or a fully charged battery is
connected
Figure 2