Operating Elements And Connections - Omnitronic PAM-70 Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

1
Input MIC 1
Balanced combo input (XLR/6.3 mm jack) for connecting
a microphone.
2 Level control for the input MIC 1
3 Input INSTRUMENT/MIC 2
Unbalanced 6.3 mm
instruments or a microphone.
4 Level control for the input INSTRUMENT/MIC 2
9 Power input
Used to plug in the supplied power cord. The PA system
may operate on mains power while chargng the battery.
10 On/off switch for the PA system
11 Charging indicator
Lights green when the battery is being charged.
12 Voltage selector switch
jack for connecting music
5 Input AUX IN
RCA jacks for connecting audio units with line level (e.g.
CD player, portable MP3 player, mixer).
6 Control USB/SD/AUX
Common level control for the input [AUX IN] and the
audio player.
7 Master control for the overall level
8 Power indicator
13 On/off switch for the audio player
14 Indication BATTERY LEVEL
Show the charging state of the battery. If the red indicator
[LOW] lights up, the battery should be charged.
15 Output LINK OUTPUT
6.3 mm jack to feed the mixed signal to another
PAM-70 PA system or to units with line level inputs
e.g. to a recording unit, mixer or active system.
25/39 00072696.DOC, Version 1.1