Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Operating Elements and Connections
Front panel
1
No.
Element
1
Audio player with six operating
buttons, USB port and SD card
reader
2
Infrared sensor for the remote
control
3
CHIME button
4
Status indicators
5
ZONE 1-6 control
6
POWER switch
7
MIC 1 control
8
MIC 2/LINE 1 control
9
MIC 3/LINE 2 control
10
LINE 3 control
11
LINE 4 control
12
PLAYER control
13
BASS control
14
TREBLE control
15
MASTER control
16
Air vents
4
2
3
7
8
9
Function
• MODE: selects the source (Bluetooth, SD card or USB)
• PLAY/PAUSE: play/pause and confirm in folder mode
• FOLDER: folder mode
• REPEAT: selects random play and repeat functions
• PREV and NEXT: previous/next title or folder (short actuation), fast
rewind/forward (long actuation)
When actuating a button, always direct the remote control towards the
sensor. There must be no obstacles between remote control and the
sensor.
For releasing the chime.
• -15/-10/-6/-3/0: level indication for the audio signal
• Clip: lights up in case of overload
• Fault: lights up with activated protective circuit
• Power: lights up when the amplifier is turned on
5-step volume controls for the PA zones 1 to 6.
Turns the amplifier on and off.
Level control for microphone input 1. This input has a priority circuit which
can be enabled with DIP switch 4 on the rear panel.
Level control for microphone input 2 or line input 1.
Level control for microphone input 3 or line input 2.
Level control for line input 3.
Level control for line input 4.
Level control for the audio player.
Tone control for the low frequencies of the mixed signal.
Tone control for the high frequencies of the mixed signal.
Controls the volume of the mixed signal at the speaker outputs.
The amplifiers use a forced-air cooling system, allowing high continuous
power levels without thermal problems.
19 • EN
5
10
11
12
13
6
14
15
16
Werbung
Inhaltsverzeichnis
