Operating Elements And Connections - Omnitronic MPVZ-180.6 Bedienungsanleitung

5.2 Operating elements and connections

This user manual describes the
1 Power on/off
Turns the unit on and off. The power indicator lights up
when the unit is powered on.
2
Control LEVEL
Master control for the total volume.
3 Tone controls
2-way tone control for the output signal: bass and treble.
4 Controls MIC 1 to 3
Volume controls for the microphone inputs MIC 1 to 3.
5 Input MIC 1
Unbalanced combo connector (XLR/6.3 mm jack) for
connecting a microphone. This input has priority: In case
of an announcement via this microphone channel the
level of the other signal sources is attenuated–depending
on the rear control PRIORITY LEVEL–thereby increasing
the intelligibility of the announcement.
MPVZ-350.6
as a reference. The other models are similar in construction.
22/28
6 LED level meter for the output signal
7 Controls ZONE 1 to 6
5-step volume controls for the PA zones 1 to 6.
8 Controls LINE 1 to 3
Volume controls for the line inputs LINE 1 to 3.
9 Button CHIME
For releasing the chime.
10 LED FAULT
Lights up with activated protective circuit:
• for a few seconds after switching-on unit the speaker
outputs are ready for operation
• during operation when the protective circuit has
switched off the speakers in case of a defect
11 Power LED
00056952.DOC, Version 1.0