Matching The Beat Between Two Titles (Pitch Bend); Playing A Continuous Loop; Selecting Repeat Functions; Reverse Play - Omnitronic PAM-70 Bedienungsanleitung

Matching the beat between two titles (Pitch Bend)

With the function pitch bend, the beat of the current title can be matched (synchronized) to the beat of a
music piece playing on another player. Thus the rhythm will not be interrupted while crossfading from one
title to another. Unlike the adjustment with the pitch slide control this function will temporarily increase or
decrease a title's speed during playback.
1
First use the pitch slide control to adjust the same number of beats (BPM) for both music pieces.
2
Then synchronize the beats of the two music pieces with the button [+] and [–]. As long as the button [+]
or [–] is kept pressed, the title is played faster or slower. As soon as you release the buttons the BPM
will automatically return to normal.

Playing a continuous loop

A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title.
1
In play mode, shortly actuate the button [IN] when the desired starting point of the loop is reached.
Playback is not interrupted. [
2
Shortly actuate the button [OUT] when the desired end point of the loop is reached. The section
between the starting point and the end point of the loop is continuously repeated. The display indicates
[ ].
3
To exit the loop and to continue the title, press the button [OUT]. The insertion [
display to indicate that a loop has been memorized and is ready to be engaged.
By selecting another title it is also possible to exit the loop.
4
To restart the loop, press the button [RELOOP].
5
To program another loop, redefine the starting and the end point with the buttons [IN] and [OUT].

Selecting repeat functions

With the button [REPEAT] two repeat functions can be selected:
• first actuation of the button (indication [REPEAT 1]): continuous repeat of the selected title
• second actuation of the button (indication [REPEAT ALL]): continuous repeat of all titles of the data carrier
• third actuation of the button: return to normal play

Reverse play

To switch to reverse play, press the button [REVERSE]. When the beginning of the title is reached, reverse
play will stop and the title will be played in forward direction. To return to forward play beforehand, press the
button once again.
] is indicated in the display.
35/39
] will remain in the
00072696.DOC, Version 1.1