Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
NOTE:
After the exclusive operation of the KVM extender has been activated at a
console, the Caps Lock, Num and Scroll Lock LEDs are blinking alternately at the
keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates that the exclusive
operation of the KVM extender is activated.
How to select the right to exclusively operate a console:
1. Press
Ctrl+Num
2. Select the row
the remote console (at the
Select the row
right for the local console (at the
3. Under
Enable exclusive
yes
right for exclusive access is granted (default)
right for exclusive access is denied
no
4. Press
F2
to save your settings.
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab
the
module).
CPU
Click on the tab
remote console (at the
4. Under
Permanent Access mode
right for exclusive access is granted (default)
Enabled
Disabled
right for exclusive access is denied
5. Click
to save your changes.
OK
Related topics:
Operating the KVM extender exclusively on page 15
Changing the video mode of consoles on page 30
(default) to open the on-screen display.
Console setup
and press
CON
module).
Local console setup
and press
CPU
press
F8
to select on of the following options:
Local
if you want to adjust the right for the local console (at
, if you want to adjust the right for the
Remote > General
CON
module).
select one of the following options:
Enter
if you want to adjust the right for
Enter
if you want to adjust the
module).
on the directory tree.
G&D DP-Vision-CAT · 29
Configuration
Werbung
Kapitel
Inhaltsverzeichnis
