Control Of The Septic System - Kessel InnoCleanPLUS Anleitung

8. Control unit operation
Menu navigation
The control unit's menu navigation is subdivided into the
system information as well as three different main menu
items. The background lighting is activated if one of the
control keys is pressed once.
OK-key: Skip to the next higher level
ESC-key: Skip to the next lower level
L
: Navigation innerhalb einer Ebene
M
Alarmkey:
The acoustic signal can be acknowledged
by pressing this key once.
If the fault has been eliminated, the visual
fault can also be acknowledged by pressing
the key once more. If the fault has not been
eliminated, the acoustic alarm is triggered
once more when the alarm key is pressed
again.

8. Control of the septic system

Display/indicator panel
Movement keys / direction keys
Enter key/OK key
Back key/ESC key
Pilot lamp indicating readiness for operation
Pilot lamp for malfunction message
Mains power supply cable
Mains connection for compressor
Connection compressed air sensor
Connection options
for external signal generator
Connection for valve block
Connecting socket for floating contact
In case of a mains power failure, the plant is not ready for
operation. The control unit switches to stand-by mode
(battery operation). This becomes noticeable by means
of an acoustic and visual alarm. The acoustic alarm can
be acknowledged by pressing the alarm key. Stand-by
mode is maintained for at least 72 hours. Afterwards, the
control unit switches off automatically. If the mains
connection is re-established within one hour, the pro-
gram will automatically continue with the last program
phase. If that is not the case, the device re-initialises itself
when the mains connection returns. This can also be car-
ried out manually by prolonged pressing of the alarm key.
Note:
Certain menus are password-protected. This serves to
protect the plant against inappropriate use.
122