System Menu; Information Menu; Maintenance Menu; System Information - Kessel InnoCleanPLUS Anleitung

8.1.System menu

System Information

Information
Systeminfo Informationen
Time: 00:00:00
Uhrzeit: 00:00:00
Floater: On/Off
Schwimmer 1: Ein / Aus
TX: Phase T1 - T24
TX: (Phase T1 bis T24)
Maintenance
Wartung
TX1: (time: 00:00:00)
TX1: (Zeit: 00:00:00)
Positions
Einstellungen
0
Time:
Floater:
T1 Feeding
TX1< 00:05:54 Feeding

8.2 Information menu

System Information
Information
Informationen
Systeminfo
Systeminfo Informationen
Uhrzeit: 00:00:00 Time: 00:00:00
Uhrzeit: 00:00:00
Floater: On/Off
Schwimmer 1: Ein / Aus
Schwimmer 1: Ein / Aus
TX: Phase T1 - T24
TX: (Phase T1 bis T24)
TX: (Phase T1 bis T24)
Maintenance
TX1: (time: 00:00:00) Wartung
Wartung
TX1: (Zeit: 00:00:00)
TX1: (Zeit: 00:00:00)
Positions
Einstellungen
Einstellungen

8.3 Maintenance menu

System
Information
Information
Maintenance
Positions
8. Control of the septic system
System Information
Attendend time
Betriebsstunden
Events/Errors
Ereignisse / Fehler
Command type
Steuerungstyp
Maintenance Date
Wartungstermin
Water level
Wasserhöhe
Parameter
Parameter
man. operation
test operation
Maintenance Date
123
Display of the hierarchy level
Time
Display of the activated floaters and their position
Display of the phase
Display of the currently expired time of the respective phase
Display of alarm/fault information
8.2.2 Incidents / faults
Display of chronological faults and incidents (see also
chapter 10 "Malfunctions and remedial measures")
All changes made to the settings are saved at this point.
8.2.3 Control type
Display of purification class, size, language and software
version
8.2.4 Maintenance deadline
Display of the next necessary and last performed main-
tenance
Note: Data are only available if these have been stored
in the menu "Settings" by the maintenance partner. (see
also 8.3.3)
8.2.5 Water level
Pressing the OK key carries out a measurement of the
current water level in the aeration basin.
8.2.6 Parameters
Display of all set control parameters of the plant. Chan-
ging the parameters is not possible in this menu (see
also 8.4.1 and 8.4.2)
8.3.1 Manual operation
Manual operation overrides automatic operation. Manual
activation of the ventilation plate lifters and of the aerator
spark plug.
8.3.2 Test operation
Automatic test of the valves in the valve block. The com-
pressor is not switched on during this process.