General Safety Instructions; Electrical Safety - Cocraft HSD240 Original Bedienungsanleitung

Sheet Sander
Art.no 18-3598 Model OS-004
40-9902
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services (see address details on the back).
Safety

General Safety Instructions

Warning! Read all the instructions. Failure to comply with the following instructions can
lead to electric shocks, fires and/or serious injury. The term "power tool" in the warning
text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) The work space
a) Keep the work space clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b) Do not use electrical hand tools in explosive environments, i.e. nearby
flammable liquids, gas or dust. Electrical hand tools generate sparks that could
easily ignite dust or fumes.
c) Keep away from children and other spectators while using the electrical
hand tool. Distractions can make you lose your concentration and control.

2) Electrical safety

a) The electrical hand tool's plug must fit correctly in the wall socket.
Never modify the plug in any way. Never use an adaptor together with earthed
electrical hand tools. Unmodified plugs and suitable wall sockets decrease the risk
of electric shock.
b) Avoid body contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. There is an increased risk of electrical shock if your body is earthed.
c) Do not expose the electrical hand tool to rain or other wet conditions. If water
gets inside an electrical hand tool it increases the risk of electrical shock.
d) Do not misuse the lead. Never use the lead to carry, drag or pull the plug
out of the wall socket. Keep the lead away from heat, oil, sharp edges and
movable parts. Damaged or tangled leads increase the risk of electrical shock.
e) When you use an electrical hand tool outdoors; use an extension cord
suitable for this purpose. Use of an extension cord for outdoor use decreases
the risk of electrical shock.
OS-004
3