Labelling / Safety Marks; Product Label - WIKA Wally Box III CPH7600 Betriebsanleitung

2 Safety
DANGER!
Danger of death caused by electric current. Upon contact with live parts, there is a
direct danger of death.
Charging using a defective power supply unit (e.g. short circuit from the mains
■
voltage to the output voltage) can result in life-threatening voltages at the
ProcessCalibrator!
Only use the mains connector permitted by WIKA for the Process-Calibrator.
■
Only use a charger that is fully-functional or undamaged.
■
The safety of the operator may be endangered if, for example:
There is visible damage to the instrument.
■
The instrument is not working as specified.
■
The instrument has been stored under unsuitable conditions for an extended period
■
of time.
If there is any doubt, please return the instrument to the manufacturer for repair or maintenance.
2.4

Labelling / Safety marks

Product label

Explanation of symbols
Before mounting and commissioning the hand-held pressure calibrator
CPH7600, ensure you read the operating instructions!
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European directives.
This marking on the instruments indicates that they must not be disposed of in
domestic waste. The disposal is carried out by return to the manufacturer or by
the corresponding municipal authorities. See Directive 2002/96/EC.
WIKA Operating Instruction, Model CPH7600
GB
9