WIKA Wally Box III CPH7600 Betriebsanleitung Seite 33

6 Commissioning, operation
To use the "%-ERROR" function, perform the following:
1. Once the calibrator is switched on and operating, press the F3 key to activate the "MORE"
menu option. Then press the F1 key to activate the "%-ERROR" option.
2. Press the F1 key to select the "CONFIG" option.
3. The first option is the port setting. Use the "SELECT" option to scroll through the choice of
ports (pressure connections). Once this is completed, select the "NEXT" option.
4. "LOOP POWER" can be toggled on or off; select "NEXT" when done.
5. Use "SELECT" to scroll through the "UNIT" options, and select "NEXT" to move on.
WIKA Operating Instruction, Model CPH7600
GB
33