General Information - WIKA Wally Box III CPH7600 Betriebsanleitung

1 General Information

1 General Information
The Hand-Held Pressure Indicator model CPH6300 described in the operating instructions has
■
been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the Hand-Held Pressure
■
Indicator model CPH6300. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the
■
range of use of the Hand-Held Pressure Indicator model CPH6300.
The operating instructions are part of the instrument and must be kept in the immediate vicinity
■
of the Hand-Held Pressure Indicator model CPH6300 and readily accessible to skilled personnel
at any time.
Skilled personnel must have carefully read and understood the operating instructions, prior to
■
beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the product
■
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the CPH6300.
The general terms and conditions, contained in the sales documentation, shall apply.
■
Subject to technical modifications.
■
Factory calibrations/NIST/optional17025 (A2LA accredited) calibrations are carried out in accordance with int
■
standards.
Further information:
■
- Internet address:
- Relevant Data Sheet:
- Application consultant:
WIKA Operating Instruction, Model CPH7600
www.wika.de / www.wika.com
CT 17.01
Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-8767
E-Mail: testequip@wika.de
GB
5