Min/Max Value Capture - WIKA Wally Box III CPH7600 Betriebsanleitung

6 Commissioning, operation

6.11 MIN/MAX value capture

The CPH7600 pressure calibrators have a MIN/MAX function for capturing the minimum
and maximum values of any displayed parameter. The MIN/MAX function can be set by stepping
through the menu options until "MIN/MAX" is shown on the display above the F1 key. At this point,
GB
pressing the F1 key will scroll the display through the MIN/MAX values that are stored in the
"MIN/MAX" registers. These readings are live so new MIN/MAX values will be recorded while in
this mode.
To clear the "MIN/MAX" registers, simply press the "CLEAR" key. These registers are also
cleared on power-up or when the configuration is changed.
WIKA Operating Instruction, Model CPH7600 35