Design And Function; Description; Scope Of Delivery; Power Supply - WIKA Wally Box III CPH7600 Betriebsanleitung

4 Design and Functions

4 Design and Function

4.1

Description

With the Model CPH7600, Wally Box III, WIKA offers a further development of the well-known
Wally Box I and Wally Box II. The Wally Box III is a compact, portable pressure calibrator, which
has been designed for mobile use as well as for stationary workshop and laboratory testing. A
special feature of this test instrument is that it is fitted with two independently- operating pressure
systems. One pneumatic system is designed to be supplied from an external pressure supply,
while the supply pressure of the second system is generated by the integrated electrical pressure
generation. This enables the user to perform different measurement tasks or calibrations,
regardless of external pressure and power supplies.
4.2

Scope of delivery

Wally Box III model CPH7600
■
Operating instructions
■
Test cable
■
Calibration hose with ½ NPT male thread connections
■
Adapter set consisting of:
■
- ⅛ NPT female to ¼ NPT female
- ⅛ NPT female to ¼ BSP female
- ⅛ NPT female to G ½ female
PTFE thread seal tape
■
Battery charger
■
3.1 calibration certificate per DIN EN 10204
■
Cross-check scope of delivery with delivery note.
4.3

Power supply

Charging
To avoid false measurements, charge the rechargeable batteries as soon as the battery indicator
appears. If the batteries run too low the CPH7600 will automatically shut down.
Use only the original charger supplied by WIKA
WIKA Operating Instruction, Model CPH7600
GB
13