Advanced Programming; Setting The Acoustic Alarm - Conrad 751364 Bedienungsanleitung

14. Advanced Programming

Advanced programming allows the user to adapt the alarm system to specific requirements.
Examples of possible specific adjustment using advanced programming:
- If a sensor is activated, the alarm system should emit a peep tone or trigger the alarm via the internal
siren.
- The beep tone should only be emitted for a predetermined period of time after a sensor is activated.
- The beep tone should only be emitted if a specific sensor is activated.
- If certain sensors are activated a beep tone should be emitted, for other sensors the alarm should be
triggered.
- If a door or window is opened (wireless door/window sensor) the light or the attached end device
should be activated (only possible with the optionally available wireless switching module, Order No.
750843).
- Further sensors and remote controls can be programmed in.
A quick overview of possible programming modes
Buttons
„PROG" button (12) + button 1
„PROG" button (12) + button 2
„PROG" button (12) + button 3
„PROG" button (12) + button 4
„PROG" button (12) + button 5
„PROG" button (12) + button 6
„PROG" button (12) + button 7
„PROG" button (12) + button 8
„PROG" button (12) + button 9
„PROG" button (12) + button 0

14.1 Setting the Acoustic Alarm

The user can individually adjust the acoustic alarm settings (beep tone or alarm sounding via internal
siren in case of an alarm). A setting can be made, for example, that only a beep tone should be emitted
when a sensor is activated when the alarm is disarmed or that the internal siren should sound. The
acoustic settings can be adjusted in both the disarmed and armed status.
Explanation
Programming for allocation of telephone numbers
Programming the security codes
Programming in new wireless sensors
Programming in new remote controls and control modules
Beep tone and alarm settings
Automatic mute switching settings
Event triggering settings
Alarm zone settings
Deleting sensors
Deleting remote controls and control modules
73